@google baseball Look for an updated version of the script or a different tool that serves the same purpose. Many scripts become obsolete as technology advances, and often, there are newer options ...

@geometry dash meltdown Thank admin!

You can stack multiple X-UPS1s to increase the current

hi i am asking if i could use rpi5 16gb to make a nas with built in battery like x1009 with 5 sata ssd a raspberry 5 16g  with 1 or 3 x-ups1 the x-ups1(s) would be to run the nas atleast 30...

Very strange. Our half height bracket must be a standard part.

You can use the RPi5 power switch pad to bring out the switch yourself

I have an ASUS RS7001-E11-RS4U 1U server with a half height PCIe slot in a "butterfly riser cage". The half height bracket on the X650 doesn't fit into the slot on the board. It's too tall or somet...

Greetings fellow Piers, Is it possible to add an On/Off switch to the Pi5 when it is installed in the metal case. Thanks Paul

@Sprunki Mod If you have legacy scripts or applications that use the sys/class/gpio interface, you will need to update them to use libgpiod. This may require significant changes to your code.

Hello, I am missing something. /boot/config.txt is set with dtparam=audio=on,pciex1. I tried the "nvme" param as well. dmesg | grep nvme founds nothing. lspci have a broadcom bridge and and Eth co...

It’s best to check if the X1003 NVME shield is fully compatible with the RP5's 512GB NVME drive. Freezing issues might stem from driver conflicts, firmware mismatches, or hardware compatibili...

@ word hurdle The PiKVM-A8 is a powerful KVM-over-IP solution.

In got it. Thanks admin @play space waves

@speedstars This solution is the best to protect your Pi and SSD

I just bought a Raspberry Pi. I'm installing headless and creating an AI, primary purpose is not image manipulation/identification.The RPi 5 boots fine from the SD card. I can't seem to read/write ...

I never expected to meet someone who shares my love for retro gaming, but bisexual hookup made it happen. I was chatting with someone about classic arcade games, and it turned out they also had an ...

I have to give up, but I assume it's partly due to that I use a Crusial P3 disk that do have a Phison controller. For me, the hat (x1001) seem to be very sensitive for RF interferance. I got it mo...

Hey Tom, It sounds like the X735 isn’t passing power through to your DAC, which makes sense since the Pi typically powers HATs through the GPIO pins. Adding the X735 might have interrupted t...

That EDID length error is definitely a red flag—it seems like the EDID data got corrupted or isn't being read correctly by PiKVM. A couple of things you can try: Manually Reset EDID &nda...

Hey there!level devil I’ve been using a similar PiKVM setup, and getting audio to work bi-directionally can be tricky. Here are a few things to consider: USB Audio Passthrough – T...