@aowolabi Hi, the distance/height from Pi 5 to the X1205-C1 case bottom is 31.1mm. Please refer to the below photo.
Cindy Ding
Admin
Staff member
35
Posts
184
Profile views
4
Likes
0
Followers
Posts made by Cindy Ding
-
Will it fit??posted in Pre-Sales Questions
-
Pi 4 with NVME Hat metal caseposted in Pre-Sales Questions
Hi, You can refer to the X876 for Raspberry Pi 4: https://geekworm.com/products/x876, you can find the case, power supply, SSD etc at Frequently Bought Together.
-
Will it fit??posted in Pre-Sales Questions
@aowolabi Hi, the X1205-C1 or X1200-C1 can not accommodate the heat sink with the right stand offs. The heatsink is too thick, the board ports can't align with the cases if you use the heatsink. Th...
-
Any free shipping?posted in Pre-Sales Questions
Hi, Sorry, we don't provide free shipping, you can also consider to order from amazon if they are available on amazon, thanks!
-
Cooling options for geekworm X630-A8posted in General Discussion
Hi, You can refer to the last FAQ on the KVM-A8 WiKi: https://wiki.geekworm.com/KVM-A8#FAQ Q. Does KVM-A8 support passive heatsink such as (P165-A or P165-B etc) instead of fan? ...
-
Geekworm X1001 is not workingposted in General Discussion
Hi,Please attach your order and email us, we can help you via email.1. Please provide the order number.2. Please provide the hardware connection photos, the SSD model you use.3. Make sure the FFC c...
-
NASPI V2.0 fan script installationposted in General Discussion
@Sébastien Lemarie Hi, really sorry, we do not test it, so can't help about your questions. We have tried to test the home assistant OS, but stucked in the process, thanks for your understan...
-
Questions about X680 and ATX modulesposted in General Discussion
@Kevin Sporinsky Hi, we have replied your question via email, please check your email, thanks!
-
WiFi/BT M.2 For Pi5 plusposted in General Discussion
@Dimitris Christopoulos Hi, we suggest you can ask for help from the Orange Pi official, thanks!
-
Gemini NASPi - RAID0/1 verifyposted in General Discussion
@Gianni D'Alonzo Hi,We haven't specifically tested OMV, but the OMV system itself supports software RAID. It can be set to PM mode and try the OMV software RAID. If you want to test (NASPi Gem...
-
Is it possible to adapt a x630-A4 to work with a full Rpi4 board?posted in Pre-Sales Questions
@Rafael Reis Hi friend, really sorry the X630-A4 can't replace X630-A3, and we suggest you can just order the X630-A3 board to use the kit with Raspberry Pi 4. If you need the X630-A3, you can cont...
-
Disk not found X876posted in General Discussion
Hi @Peter Shewood 1. Please help provide the screenshot of run the lsusb and lsblk command via email.2. Can it work if it is connected to the USB2.0 port of the Raspberry Pi motherboard with...
-
UPS Hats and Gemini NASposted in Pre-Sales Questions
@Peter D Hi sir,Really sorry there is no UPS hat can combine with the NASPi Gemini 2.5 kit to use together.best regards,Cindy
-
Question about X728-A1 and combination with...posted in Pre-Sales Questions
@quarreller quarreller Hi sir,First, we think the N300 case is enough for passive cooling.We do not test if the X728-A1 is ok for the combination, it seems OK, but may need to use proper spacer st...
-
X728 with the X715posted in General Discussion
@Andrew Fitzpatrick Hi,Yes, the X728 can use with X715 together.But please do not stack them via GPIO, in case any wrong operation to damage the boards. You can use the XH2.54 2pin cable to connec...
-
X857-C3posted in General Discussion
@Jean-Paul Delamarre Hi sir, sorry about the inconvenience. we have got your email and we will help you solve the issue by email, thanks! best regards, Cindy/Geekworm
-
Confusion: PSW19 has no NC Legposted in General Discussion
Hi friend, The power switch has been updated to a new verion, please refer to the photo : https://wiki.geekworm.com/PSW19#/media/File:PSW19-UPDATE.jpg
-
Third Generation HDMI to LVDS board. What has changed?posted in General Discussion
Hi friend, The new version of LVDS V1.5 has replaced the main chip, and the functions and interface definitions have not changed, but according to the manufacturer's test, the compatibility will b...
-
Please redo your storeposted in Pre-Sales Questions
@James Boelter Hello sir, do you refer to our categories? It is clear there.
-
Raspberry Pi 3B+posted in Pre-Sales Questions
Hi friend, Thanks for your email. Really sorry that the X820 V3.0 case does not support X708 UPS board. You can use the X820 board +X708 UPS without the X820 V3.0 case for Raspberry Pi 3B+. The...
