@melon playground the KVM-A3 supports USB audio pass-through, which means you can use the local laptop's microphone. Make sure to connect the microphone to the local laptop via USB or the headphone...

Hi, I recently purchased the Geekworm KVM-A3 for use with PiKVM and I need some guidance on the audio setup for my specific use case: Setup:- Local laptop (source) → KVM-A3 + Raspberry Pi 4 &...

It seems like the Redfish API is exposing only one system ID (0). This might indicate that the servers connected to the X680 are being treated as a unified resource pool. Check if there’s a c...

@infinite craft Regarding the Marvel vs Capcom refresh rate issue, the third-generation board may improve this, but this depends on whether it includes optimizations for handling different refresh ...

@slither io Further testing or alternative setups may help clarify compatibility issues.

Does the Raspberry Pi Hailo 8L accelerator (PCIe) fit the Argon Neo 5 M.2 NVMe case?I just want to know if the PCIe module fits within the case. Thanks,Jack

Replied to your email， please check your email

I purchaed the X1001 and the 1TB Colorful NVME drive. Installed them.  I get the blue light and the drive seems to be sensed by the computer. GPARTED sees the drive and can create and format ...

How can we get/set the system ID for each server connected to an X680 to control the ATX power using Redfish?  It should be at the API endpoint "/redfish/v1/Systems/<Node ID>" but only a...

Hello, the HDMI to CSI-2 module with the Toshiba TC358743XBG chip generally has a latency of around 1-2 frames. This latency can vary based on the specific configuration and the processing capabili...

It was working, now I don't have the option to change my output device from computer speakers to the HDMI plugged into my device. It's not the computer; if I put the HDMI into a TV, it then g...

Hi,Please attach your order and email us, we can help you via email.1. Please provide the order number.2. Please provide the hardware connection photos, the SSD model you use.3. Make sure the FFC c...

Hello, I am missing something. /boot/config.txt is set with dtparam=audio=on,pciex1. I tried the "nvme" param as well. dmesg | grep nvme founds nothing. lspci have a broadcom bridge and and Eth co...

I was wondering if anyone knows as to whether or not these devices can schedule power on (not WoL) / off operations, I'm assuming they can purely because they pass through the front panel headers t...

I use AI to analyze your logs as follows:   From the log information you provided, there are several key errors and warnings to note: F2FS not supported on PAGE_SIZE(16384) != 4096:This...

This article breaks down how to boot a Raspberry Pi 4 from an SSD using the X825 and X735 boards. If you’re diving into Pi upgrades and want faster, more reliable boot times, this guide is go...

PiOS/Debian 12.7 Linux rpi3 6.6.31+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux After setting up an identical system, I'm beginning to wonder if maybe it's ju...

PiOS 12.6 to 12.7 What version is this? My current version are as follows: pi@raspberrypi:~ $ uname -a Linux raspberrypi 6.6.47+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.47-1+rpt1 (2024-09-02) a...

Follow up: I wrote a script to check voltage every second and then log every minute the results for that cycle including minimum voltage, max voltage and average voltage over the 60 seconds along ...

I've been using an X1012 PoE + NVMe board for a few months now, and it has been very stable until this past week.  I updated from PiOS 12.6 to 12.7, and now it seems that my drive "disappears...