Raspi 4b/8 with Raspbian Gemini 2.5 with 2x Seagate Barracuda 5TB R1 Intenso 2TB SSD for Naspi Backup Have started with the OS on a winkom 16GB usb key (SLC cells), all went nice for several wee...

Thank you so much for providing that link. For the time being, the recommendation to "sudo rpi-update pulls/6795" seems to have worked to resolve my issue. The inability to update the OS is not ide...

Hello This is a kernel issue, please wait for an update from Raspberry Pi fundation. Other buyers have reported the same issue. Please refer to Cannot open device /dev/video0 on Pi 5 HDMI to CSI (...

My X1301 which worked well for about a month stopped working, and no longer visible as a mediaX device with "v4l2-ctl --list-devices". It's not listed via "media-ctl -p" either. I made sure the the...

@sprunki Verbinde dich über SSH mit deinem Volumio-Gerät. Du kannst ein Terminal oder ein SSH-Client wie PuTTY verwenden: ssh volumio@<IP-Adresse>

@slope Audio Configuration: Use a USB audio adapter connected to the KVM-A3. This will allow you to route audio from your local laptop's microphone and speakers through the KVM to the remote lap...

Could you provide more detailed information?

@aowolabi Hi, the distance/height from Pi 5 to the X1205-C1 case bottom is 31.1mm. Please refer to the below photo.

Hey everyone, I'm loving my new Geekworkm KVM-A8, the PCI version. PiKVM is a lifesaver! The only issue is that little fan. It's surprisingly noisy at night. Has anyone swapped theirs out? I'm even...

Wie binde ich das X1013 PCIe to 10-port USB 3.0 + USB 2.0 expansion board in Volumio Software seitig ein? Ich habe es anch ihrem verlinkten Software Tutorial (Aktivieren PCIe Interface) probiert, ...

Or permanently if necessary

Hi! I have the Naspi sata case for raspberry pi. It's great but the LEDs on the front including the power button are so bright they keep me up at night - it's there a way of turning them off temp...

When copying larger files (>10GB) from SD card to SSDs connected to the X1009 the file operation often breaks, even more when copying files from one SSD to the other. The error does not happen e...

Hi, You can refer to the X876 for Raspberry Pi 4: https://geekworm.com/products/x876, you can find the case, power supply, SSD etc at Frequently Bought Together.

That makes sense. Do you know of any workaround or adapters that might work for a 30-pin 4K LVDS connection? Would using an HDMI to eDP converter be a possible solution, or is there a specific boar...

Is there a metal case for the Pi 4 with the NVME hat like the one for the Pi5 available?  

@Cindy Ding thanks for your response, out of curiousity how tall are the  Pi 5 X1205 UPS shields?

@aowolabi Hi, the X1205-C1 or X1200-C1 can not accommodate the heat sink with the right stand offs. The heatsink is too thick, the board ports can't align with the cases if you use the heatsink. Th...

Hi Geekworm!!, I have a Raspberry Pi setup that has a Back-mounted PCIe 3.0 Switch to dual M.2 hat for Raspberry Pi 5 (Seeed Studio) with an SSD and a Hailo 8 Accelerator with Heat Sink attached t...

@Red Light Green Light Consider replacing the existing fan with a higher quality, quieter model. Look for fans specifically designed for low noise, such as those with fluid dynamic bearings (FDB) o...