All orders placed will be shipped out as usual, but delivery times are expected to be affected due to COVID-19. Thanks for your continued support with Geekworm.  Read More

News

Jetson Nano UPS T208 18650 UPS ( Max 5.1V 8A Output ) & Power Management Expansion Board

Jetson Nano UPS T208 18650 UPS ( Max 5.1V 8A Output ) & Power Management Expansion Board

T208 is the upgrade version of T200, supports upto 6-cell 18650 battery, can provide enough power supply for your outdoor scientific research. We no longer use cable connections and use new and more reliable GPIO connections.The T208 is an advanced uninterruptible power supply (UPS) expansion board specially designed for NVIDIA Jetson Nano Developer Kit. It provides Max 5.1V 8000mA Power...
by Cindy Ding on September 18, 2020
2
Geekworm Raspberry Pi 4 NAS Kit

Geekworm Raspberry Pi 4 NAS Kit

1. X825 2.5" SATA HDD/SSD Shield Case Power Kit with Power Management Function for Raspberry Pi 4 Model B only Please refer to: https://geekworm.com/products/raspberry-pi-4-x825-board-x825-case-x735-board-dc-5v-4a-power-supply-kit Installation Video: The X825 expansion board provides a complete storage solution for newest raspberry pi 4, it supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). Only 2.5 inch SATA interface HDD/SDD...
by Cindy Ding on August 29, 2020
2
What's the difference between X825-C6 and X825-C7 case?

What's the difference between X825-C6 and X825-C7 case?

In August 2020, we release the X825-C7 metal case, also will keep the X825-C6 metal case. You may ask what's the difference between X825-C6 and X825-C7 case? X825-C6: raspberrypiwiki.com/X825-C2_Case X825-C7: raspberrypiwiki.com/X825-C7 Our X825-C1 to X825-C6 case are designed for Raspberry Pi 4&X825 2.5" SATA SSD/HDD Storage Board&X735 Power Management Board;  support to install the X735 Auto Cooling & safe shutdown board over Raspberry Pi 4....
by Cindy Ding on August 18, 2020
0
Geekworm X708 UPS & Power Management Board Realease for NAS Solution with UPS Function

Geekworm X708 UPS & Power Management Board Realease for NAS Solution with UPS Function

Why design and release X708? Although we provide a compelete Raspberry Pi NAS solution with NAS shield(X825/X857/X829/X835 etc.),X735 Power Management Board and matching metal case, but we still have received many feedbacks that want to support UPS, so we have to respond to this request.Our original intention of designing X708 is to match with NAS shell (such as X829-C1, X857-C1,...
by Cindy Ding on July 23, 2020
0
Raspberry Pi and Other Tech for Remote Learning

Raspberry Pi and Other Tech for Remote Learning

While technology makes remote learning possible, the right tech is what you need to maximize it. Indeed, Halifax-based education consultant Paul Bennett predicts that online learning will play a bigger role in reshaping today's classroom, claiming it could become the proverbial spine of the education system in the near future. That being said, here is some of the hardware and...
by DingCindy on June 30, 2020
0
N100 Case Update Support Both Jetson Nano B01&A02 and Jetson Xavier NX

N100 Case Update Support Both Jetson Nano B01&A02 and Jetson Xavier NX

After intall and test N100 case with NVIDIA Jetson Xavier NX Developer Kit, we find that the Geekworm N100 case also support install the Jetson Xavier NX, but you will need extra 2pcs WiFi Antenna with IPEX MHF4 to RP SMA Female Extension Cable to use together with N100. To use the WiFi antennas, it need to remove the buttom holder...
by Cindy Ding on June 23, 2020
0
Some Tips About USB 3.0 Devices

Some Tips About USB 3.0 Devices

USB 3.0 devices might generate radio frequency interference that can cause Wi-Fi and other wireless devices operating in the 2.4GHz band to have issues communicating with your Raspberry Pi4. To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. If problem still exists, please turn off WiFi and use the wired network instead.
by Cindy Ding on June 08, 2020
0
Raspberry Pi Foundation Release BETA Version to Support USB Boot for Raspberry Pi 4

Raspberry Pi Foundation Release BETA Version to Support USB Boot for Raspberry Pi 4

On May 2020, The Raspberry Pi Foundation released BETA version to support USB boot now, and this method has been tested. For the details, please refer to Pi 4 Bootloader Configuration   Does the X825/X828/X829/X855/X856/X857/X862/X872/X835/X832 support USB boot? Please refer to here: https://raspberrypiwiki.com/Does_the_X825/X855_support_USB_boot
by Cindy Ding on June 03, 2020
0
Raspberry Pi 4 8GB is Coming

Raspberry Pi 4 8GB is Coming

When the Raspberry Pi Foundation introduced the Raspberry Pi 4 last year, it was described as a "complete desktop computer", but the fact is that its performance is not powerful, even if you choose the 4GB model, you can’t run many desktop computers. Completed tasks. Today, Raspberry Pi 4 got an upgrade, and the new 8GB version joined the ranks...
by Cindy Ding on June 03, 2020
0
Stress Testing Your Raspberry Pi  for Cooling and Overclocking

Stress Testing Your Raspberry Pi for Cooling and Overclocking

Part of the joy that is Raspberry Pi is getting stuck into it at a slightly lower level and finding out exactly what you can do with it if you take a look under the hood. One of the most popular experiments to do with your Raspberry Pi is overclocking it. Overclocking is fairly simple to do on the Raspberry Pi, however,...
by Cindy Ding on May 09, 2020
0
BACK TO TOP