X1301 Stopped Working

• AU

  Ahmet Uzun

  4/21/25, 11:21 AM

  My X1301 which worked well for about a month stopped working, and no longer visible as a mediaX device with "v4l2-ctl --list-devices". It's not listed via "media-ctl -p" either. I made sure the the /boot/firmware/config.txt is still populated correctly.

  I think I do see it with "i2cdetect -y 11" but nothing helps bring it back. This may have happened after the latest rpi firmware update. Any ideas?

       0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
  00: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- UU
  10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
  70: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  0 likes 0 likes Liked Like

  ---

  3
  Posts

  29
  Views

  Reply

  ---

• H

  Harry Staff member

  4/21/25, 12:13 PM

  Hello

  This is a kernel issue, please wait for an update from Raspberry Pi fundation. Other buyers have reported the same issue. Please refer to Cannot open device /dev/video0 on Pi 5 HDMI to CSI (TC358743):

   

  It is not recommended that you update the OS in the future.
  0 likes 0 likes Liked Like

  ---

• AU

  Ahmet Uzun

  4/21/25, 12:37 PM

  Thank you so much for providing that link. For the time being, the recommendation to "sudo rpi-update pulls/6795" seems to have worked to resolve my issue. The inability to update the OS is not ideal however for security reasons.

  0 likes 0 likes Liked Like

  ---