found the culprid it was the included 30cm hdmi cable that had the problem. after using a different cable everything is working.

[ 12.974083] mc: Linux media interface: v0.10 [ 13.013149] videodev: Linux video capture interface: v2.00 [ 13.036612] i2c_dev: i2c /dev entries driver [ 13.046317] systemd-journald[250]: Received ...

biuld it based on the howto video but it is not working. the video is not detcted. is there a way to show if the capture device is working. the other cracy thing is the pacakge looked used when...

Verify that the SSDs are functioning appropriately. To accomplish this, look for any SSD-related error messages in the system logs. You may also try badland attaching the SSDs to a different device...

do i have to use the case that comes with this if not could i possibly add a ups hat?

@Cindy Ding  I would have the same questions concerning:   1) the possibility to power the X680 via PoE (the Wiki mentions it, but I cannot find any additional info about it, expeciall...

There was no follow up on this topic, but the system is configured with RAID1 since a few weeks now, and I've the case when the OS is showing /dev/sdb instead of /dev/sda as mounted disk, and it re...

Hi, I can not able to find firmware for X305 router expansion board. Neither in the wiki nor in the forum. Board powers on and it powers the hosting raspberry pi zero W, also I can able to boot op...

After quite a while both LED stopped blinking. Must be around an hour or so. Everything is fine now.

This one only takes minutes: https://www.the-diy-life.com/how-to-boot-a-raspberry-pi-4-from-an-ssd/

Hey Guys, I've recently set up a NASPi Gemini 2.5 with the X882 V2.0 Board. Everything is working very nice with 2 x 1 TB Samsung 860 EVO SSDs and the latest LTS RPi OS. Whole setup is running smo...

@Sébastien Lemarie Hi, really sorry, we do not test it, so can't help about your questions. We have tried to test the home assistant OS, but stucked in the process, thanks for your understan...

@Kevin Sporinsky Hi, we have replied your question via email, please check your email, thanks!

Hello, I'm new to Raspberry and I have a question: With this box geeksworm v2.0  https://geekworm.com/products/geekworm-naspi-2-5-sata-hdd-ssd-kit-for-raspberry-pi-4-model-b To correctly us...

I'm looking at getting the X680 for my home lab but have some questions. 1) Can the device be powered by PoE? 2) What are the device's dimensions?  Would it perhaps fit inside a 1U or 2U slo...

Hello! I have slow mouse response on my PIKVM. I've found how people fix it, but I cant make it on my PIKVM.Please, help me, I use linux system first time and maybe I don't understand some key-comm...

Detaching the battery after shutdown requires a tweak that is specific to the hardware configuration and battery geometry dash lite attachment method of the X728 board.  The three-second butto...

I'm not sure there's a diagram for you, let's explore Papa's freezeria  

Great, thank you for sharing, join wordle hint to get the most accurate answer.     

A PoE splitter that splits the Ethernet and power signals is an option. While the Ethernet connection is utilized for network connections, the PoE splitter will separate the power from the Ethernet...