NASPi Gemini 2.5 X882 HDD LEDs are constantly blinking

• led
• SSD
• X882
• NASPi Gemini 2.5
• Blinking

• JR

  Joschi Ro

  8/10/23, 10:23 PM

  Hey Guys,

  I've recently set up a NASPi Gemini 2.5 with the X882 V2.0 Board. Everything is working very nice with 2 x 1 TB Samsung 860 EVO SSDs and the latest LTS RPi OS. Whole setup is running smooth in RAID0 with average speeds of ~220 MB/s.

  Moved OS to the SSD and removed the SDcard.

  Question: 
  Both drive LEDs (HDD1 and HDD2) are constantly blinking simultaneously which is quite annoying. Why are they doing this and is there a solution to stop it?

  Thanks, Joschi!

  0 likes 0 likes Liked Like

  ---

  4
  Posts

  168
  Views

  Reply

  ---

• JR

  Joschi Ro

  8/11/23, 2:30 AM

  After quite a while both LED stopped blinking. Must be around an hour or so. Everything is fine now.

  0 likes 0 likes Liked Like

  ---

• HH

  Harry Huang Staff member

  5/7/24, 12:44 PM

  @Joschi Ro @Joseph Lane 

  If there is data read/write the LED will blink, this depends on the line of the OS, it has nothing to do with the NASPi hardware itself, if there is no data read/write the LED will always be on. 

   

  Thanks

  0 likes 0 likes Liked Like

  ---