•
1 10

Voltage Regualtor Power Expansion Board with 6~24V Wide Input for Raspberry Pi 5/4B/RDK Series/Robotics & Embedded Projects

$25.00
$25.00
Only 30 items in stock! Out of stock!
  • Description
  • Manual
  • Shipping Policy
  • Reviews

Overview

The Power Supply Expansion Board (YB-MPP01-V1.0) is a purpose-built, high-efficiency voltage regulation expansion board designed specifically for the Raspberry Pi 5. Integrating multiple input/output options and advanced power management, it converts wide DC input into a rock-solid, fully compliant 5V/5A power output tailored to the Raspberry Pi 5’s exact power specifications.

Say goodbye to low-voltage warnings and restricted peripheral performance. By supporting the Raspberry Pi 5 exclusive PD protocol, this board unlocks the full 1.6A USB port current capacity, allowing you to run high-power USB devices, drives, and accessories without hassle. Its compact, stackable design with standard M2.5 mounting holes makes it perfectly suited for mobile platforms like smart cars, wheeled/quadruped robots, robotic arms, and IoT edge projects.

Note: The Type-C output port is dedicated to power delivery only and does not support USB data transmission.

Key Features

⚡ Raspberry Pi 5 PD Protocol Compliance

  • Official Spec Match: Fully complies with the Raspberry Pi 5 official 5V/5A power requirement.
  • Maximized USB Output: Completely eliminates low-voltage warnings and unlocks full 1.6A current across USB interfaces (compared to the 0.6A limit with non-PD supplies).

🔋 6–24V Wide Input Voltage Range

  • Versatile Compatibility: Accepts power from DC adapters, lithium battery packs, vehicle power supplies, or robot bus power.
  • Automatic Current Adjustment: Delivers 5V/3A with a 6V input, and 5V/5A with a 7–24V input.
  • Linear Compensation: Maintains precise voltage output even under fluctuating input source conditions.

🔌 Rich & Versatile Interfaces

  • Type-C Output Port: Dedicated power supply output for Raspberry Pi 5 (cable-free setup with included bridge adapter).
  • 2× PH2.0-2Pin Connectors: Easy power breakout for sensors and low-power peripherals.
  • DC 5.5×2.1mm Barrel Jack: Ideal for powering Jetson Nano and other DC-powered devices.
  • 2× 6Pin Bent Pin Headers: Simple connection for Arduino, STM32, ESP32, and custom MCU development boards.

🛠️ Stackable DIY Design & Wide Ecosystem

  • Flexible Mounting: Can be stacked directly on top or underneath the Raspberry Pi 5 board.
  • Dual Type-C Bridge Included: Features a custom dual Type-C bridge for a clean, cable-free power connection.
  • Multi-Board Compatibility: Works seamlessly with Raspberry Pi 5, Pi 4B, Jetson Nano B01, STM32, ESP32, K210, and RDK series boards or other 5V DC powered single-board computers
  • Ideal Applications: Perfectly tailored for wheeled, quadruped, or tracked robots, robotic arms, IoT edge computing nodes, and custom embedded systems.

🛡️ Multi-Layer Circuit Safety

  • Comprehensive Circuit Protection: Built-in input reverse polarity protection, output over-current protection, current limiting, over-voltage protection, and over-temperature protection.

Power & Safety Usage Guide

⚠️ IMPORTANT POWER & HANDLING WARNINGS:

  • Single Power Input: Never connect multiple power sources to the input interfaces simultaneously.
  • Pi 5 Input Requirement: To achieve the full 5V/5A performance required for Raspberry Pi 5, input voltage MUST be between 7V and 24V. (A 6V input provides only 5V/3A).
  • No Input to Output Ports: Do NOT feed external voltage/power directly into any output interfaces. Maximum allowed input is 24V DC.
  • Do NOT Measure Type-C Output with a Multimeter: The Type-C port relies on active PD handshake negotiation. Probing directly with a multimeter will fail to read voltage and risks short-circuiting and damaging the board!
  • PD-Compatible Cable Required: If using a Type-C cable instead of the bridge adapter, ensure the cable is PD-compliant to trigger power negotiation.
  • Non-Conductive Operation: Always operate the board on an insulated, non-conductive surface to prevent accidental short circuits from contact with metal.

Technical Specifications

Parameter Specification
Model YB-MPP01-V1.0
Voltage Input 6V ~ 24V DC
Voltage & Current Output 5V/3A (at 6V input) | 5V/5A (at 7~24V input)
Supported Power Protocol Raspberry Pi 5 exclusive PD protocol (5V/5A)
Input Interfaces 1x KF301-2P screw terminal (5.08mm) | 1x XH2.54-2Pin | 1x DC 5.5×2.5mm barrel jack
Output Interfaces 1x Type-C (Power delivery only) | 2x PH2.0-2Pin | 1x DC 5.5×2.1mm barrel jack | 2x 6Pin bent pin headers
LED Status Indicators Red LED: Power input status | Blue LED: 5V output status
Circuit Protections Input anti-reverse polarity, output over-current, current limiting, over-voltage, over-temperature
Board Compatibility Raspberry Pi 5 (recommended), Raspberry Pi 4B, Jetson Nano B01, STM32, ESP32, K210, RDK series
Dimensions & Weight 65 mm × 56 mm | Net Weight: 32g (M2.5 mounting holes)

Packing List

  • 1 x Yahboom Power Supply Expansion Board (YB-MPP01-V1.0)
  • 1 x Dual Type-C Bridge Adapter (for Raspberry Pi 5 stacked setup)
  • 1 x XH2.54-2Pin Power Cable (15cm)
  • 1 x Set of M2.5 Mounting Hardware (copper standoffs, screws & nuts)
  • Note: Raspberry Pi 5 mainboard, power adapters, cooling fans, and other peripherals shown in photos are for demonstration only and are not included.

Refer to: https://wiki.geekworm.com/YB-MPP01_PD_Power_Board

Please email to us at info@geekworm.com if you have other questions.

We send orders to worldwide with tracking number.

For detail refer to Shipping Policy

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like

Recently viewed product