Hello,sir Sorry for the inconvenience, and thank you very much for your suggestion, we have updated it(X728-hardware#Pins and GPIO used). https://wiki.geekworm.com/X728-hardware Best ...
All Posts
-
PLEASE update pinout table of x728 with the correct information
The fact that pin33 (which is listed in the pinout table on https://wiki.geekworm.com/X728-hardware has been changed to pin37 is not listed in there. Please fix this it took me and others way too l...
-
NASPI Flashing Light below power button
Hi, have you considered reinstalling the OS on the SSD? Then see if the function is normal?
-
Need to Manually Start Fan Each Boot
@Nathan Dilgard Hi, Thanks. Which OS? Or you can place the following line in the /etc/rc.local sudo pigpiod python ./x-c1/fan.py & or use the another method: How to add crontab job ...
-
Need to Manually Start Fan Each Boot
Evertime I reboot my Pi incased in the X-C1 I need to run the blow steps in order to get the fan to run: sudo killall pigpiod Must run or I will get an error when I try and run python ....
-
NASPI Flashing Light below power button
I have installed the NASPIcase and it works beautifully, running Ubuntu server without issue. My installation was performed on an SD card, but I want to boot from SSD. To migrate...
-
X883 + X735 issues
@Lisa ZHANG Interesting new development, the one drive is showing up like a usb drive now.
-
X883 + X735 issues
@Lisa ZHANG I removed the X735 and still have the same results. Only one drive shows up. Below is an fdisk -l readout $ sudo fdisk -lDisk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectorsUnits: sector...
-
X883 + X735 issues
@Lisa ZHANG I don't have the equipment to take a video but I can tell you that I formated one drive and labeled it so that I could tell after switching locations if it was a drive issue or if there...
-
X630 installation on Raspi 2B V1.1
Hello,Nik Please try to download this system and test it. https://downloads.raspberrypi.org/raspios_full_armhf/images/raspios_full_armhf-2021-05-28/
-
X630 installation on Raspi 2B V1.1
Hey there,I've been trying to install the X630 on my Raspi 2B V1.1 with Raspian Buster using these instructions for installation with hardware reset. Trying to start "raspistill" or "raspivid", I'm...
-
x825 HDD height problem
Hello, Sorry, x825-C6 has been discontinued, now only X825-C8---Support Max 9.5MM thickness 2.5 inch SATA HDD/SSD
-
Tech support
Hello , sir Sorry for the late reply. If you still need any help, please contact here [support@geekworm.com]. and please tell us your order number. Thanks~ Best regards
-
X883 + X735 issues
Could you please provide more test details and end some pictures or videos? Thanks
-
no hdmi output
Thsi wound up being the solution for me. Code: Select all sudo nano /boot/config.txt find:dtoverlay=vc4-kms-v3dadd/change to:dtoverlay=vc4-fkms-v3dby adding an f, this will change th...
-
Tech support
The raspbery pi forum was able to answer this for me. Code: Select all sudo nano /boot/config.txt find:dtoverlay=vc4-kms-v3dadd/change to:dtoverlay=vc4-fkms-v3dby adding an f, this w...
-
x825 HDD height problem
I recently purchased a x825-c8 case and the x825 v2.0 board. Since the description said its for 4TB HDDs I thought this would be okay. The products arrived, I removed my HDD from its external...
-
Tech support
Im looking for some tech support from geekworm, does anyone know the best place for this? I tried the "contact us" link on the webssite but nothing was there. I recently bought the naspi kit from t...
-
X883 + X735 issues
@Lisa ZHANG So I ordered a replacement from Amazon that finally arrived. I reassembled the new unit and still have the same problem. Do you think it is worth reloading Raspian and trying again?
-
3d Cad Model for Geekworm N100
Hello, Please email us, we will send you 3D Cad by email. support@geekworm.com Best regards