🎄 The Christmas Countdown Sale – 5% Off Everything! 🎄 Celebrate the season with 5% off storewide – no minimum required. Festive deals for everyone, so don’t miss out!

NASPi Gemini 2.5 X882 HDD LEDs are constantly blinking | Geekworm

NASPi Gemini 2.5 X882 HDD LEDs are constantly blinking

JR

Joschi Ro
8/10/23, 10:23 PM

Hey Guys,

I've recently set up a NASPi Gemini 2.5 with the X882 V2.0 Board. Everything is working very nice with 2 x 1 TB Samsung 860 EVO SSDs and the latest LTS RPi OS. Whole setup is running smooth in RAID0 with average speeds of ~220 MB/s.

Moved OS to the SSD and removed the SDcard.

Question:
Both drive LEDs (HDD1 and HDD2) are constantly blinking simultaneously which is quite annoying. Why are they doing this and is there a solution to stop it?

Thanks, Joschi!

0 likes 0 likes

4
Posts

173
Views
JR

Joschi Ro
8/11/23, 2:30 AM

After quite a while both LED stopped blinking. Must be around an hour or so. Everything is fine now.

0 likes 0 likes
HH

Harry Huang Staff member
5/7/24, 12:44 PM

@Joschi Ro @Joseph Lane

If there is data read/write the LED will blink, this depends on the line of the OS, it has nothing to do with the NASPi hardware itself, if there is no data read/write the LED will always be on.

Thanks

0 likes 0 likes

Please login to reply this topic!