Hello...I saw that on May 10th, 2021 you released the third generation of your LVDS to HDMI board. I have been using with Arcade1Up and just had a few questions.1) Is there a list of changes or fix...
All Posts
-
X735 GPIOs
Is it possible to read state of GPIOs 4, 17, 18 of X735 v2.1 by RPi without "script" installed? Is any of those GPIOs connected directly to the momentary or latching button connector?
-
x750 UPS batteries charging time
Hello! How long does it take to charge four 3500mah 18650 Li-on Batteries with the 5v 4A charger (DC Jack) on the X750 ups without the Raspberry pi connected? Will the charging current be exactly ...
-
Combination x930 + x708 + x825 with SSD working?
Hello support, dear forum, I want to build an Raspberry Pi 4 with UPS and a DAC with Headphone Jack. At the moment I own a Raspy 4 with x825 and x735 with 5V 4A Power Supply. Is it possible to u...
-
Raspberry Pi Voice HAT LED not working
@kay koch This board does not use standard GPIO pins. It uses MOSI = GPIO23, SCLK = GPIO24. Documentation is close to non existing, but I found this one that works: https://github.com/u-geek/R...
-
x728 software for OpenWRT
Hello, I'm running OpenWRT on my Pi. I'm also runing the x728 UPS but the scripts need to be updated to use the python3 libraries, and I believe the install locations need to be changed for this to...
-
Please redo your store
@James Boelter Hello sir, do you refer to our categories? It is clear there.
-
Mating Connectors - X825
Another customer confused by lack of information and clear parts identification in your shop. Please redo.
-
Please redo your store
The store is very hard to see what you need. The parts all have similar names and becomes confusing. I was going to buy a complete kit and case for my pi 4 but the names and model numbers got too ...
-
Raspberry Pi Voice HAT LED not working
@Harry Huang Thanks for your reply. It looks like. Someone from rhasspy community bought the same HAT with same problems
-
-
Raspberry Pi Voice HAT LED not working
@Harry Huang Fresh installed: OS Buster (update + dist-upgrade) git seeed-voicecard pip, spidev SPI enabled Voice-Hat (download + unzip) sudo python pixels.py /va...
-
Raspberry Pi Voice HAT LED not working
@Harry Huang No other GPIOS used. Fresh installed buster. Which kind of errors? pixels.py runs and prints whatever I want. SPI is activated. I will try to watch syslog and post it later. ...
-
Raspberry Pi Voice HAT LED not working
Hi, Thanks. 1. Do you use other GPIO pins? 2. Could you provide more details such error snapshot or other photos? Regards
-
Raspberry Pi Voice HAT LED not working
Hello, I'm using the Voice HAT Voice_HAT Speaker and Micro are working with seeespeeker Software. (Raspberry 3, Raspberry Pi 3A+, Buster) LEDs are not working. Green LED is permanently ON. ...
-
add an optical input on HIFI DAC+
Hello, I bought in 2018 april a HIFI DAC + for my raspberry P3B+ and there's no problem. Now I would connect the optical output of my TV on the DAC and I would like to know if it is possi...
-
About X873 IO error
Dear all, If you find that you have encountered an IO error like the following picture, please contact us(info@geekworm.com) to update the firmware. IMPORTANT!!! This software is strict...
-
AtGames Legends Ultimate
Has anyone been successful using the LVDS to HDMI adapter on the 1.1 Cabinets? I have had no luck but not sure if its the monitor I'm using, i tested both a 23" Asus VH236H and an LG 27GN850-B. I c...
-
edit on-off message to Rpi
hello! before shutdown, i need to perform an action on the RPi.. can the switch off button's message to Rpi be edited in order to perform this action before the acutal safe shutdown? let's say: 1...
-
X708 and Ubuntu 20.10
Has anyone try to get the X708 ups hat working on a pi4 with Ubuntu 20.10 running? Ihave working the i2c service, and the start/stop button is working as must be. I must say that I am not a linux e...