I purchaed the X1001 and the 1TB Colorful NVME drive. Installed them.
I get the blue light and the drive seems to be sensed by the computer. GPARTED sees the drive and can create and format a partition. But I can't copy data to the drive because I get input/output error. And after a few minutes, the drive just disappears. After that, nothing can see it. GPARTED does not detect the drive.
Removed and reseated the NVME module.
Removed and reseated the little PCIe ribbon cable.
Nothing changed.
Still have the blue light but nothing else. After power off and power on... Same sequence and behavior.
I looked for similar on the forum but may not know what key words to look for since I didn't find anything useful.
Any help appreciated.
