Redfish Power Managment with X680

• x680
• Redfish

• c

  craig.yamato

  11/16/24, 6:23 AM

  How can we get/set the system ID for each server connected to an X680 to control the ATX power using Redfish?  It should be at the API endpoint "/redfish/v1/Systems/<Node ID>" but only a single ID of 0 exists.
  
  

  {
      "@odata.id": "/redfish/v1/Systems",
      "@odata.type": "#ComputerSystemCollection.ComputerSystemCollection",
      "Members": [
          {
              "@odata.id": "/redfish/v1/Systems/0"
          }
      ],
      "Members@odata.count": 1,
      "Name": "Computer System Collection"
  }

  0 likes 0 likes Liked Like

  ---

  2
  Posts

  15
  Views

  Reply

  ---

• i

  iteaccident

  11/21/24, 6:22 PM

  It seems like the Redfish API is exposing only one system ID (0). This might indicate that the servers connected to the X680 are being treated as a unified resource pool. Check if there’s a configuration in the management interface of the X680 to expose individual servers as separate Members.

  @tunnel rush is known for its vibrant and dynamic visual design. Check it!

  0 likes 0 likes Liked Like

  ---