Hi i have a raspberry pi5 with an x1009, i only attached 1 drive, im using a 12v 5a power source meant for LED lights, i can see the x1009 doing lspci, but the disk wont spin and the blue light als...

@Shaun Watson When I was last looking for a new HDMI cable, I thought about how many things need to be taken into account: length, standard, transmission speed. I tried a couple of inexpensive opti...

When selecting roofing materials, durability and aesthetics are paramount. Chinese Asa Resin Tile offer a combination of both, making them a popular choice for various architectural projects. ...

When it comes to preparedness and safety, having a reliable First Aid Box is essential. Yonoel offers a diverse range of high-quality first aid boxes designed to meet various needs and standards. W...

@geekworm Sorry, X1202 does not support your idea.

@Snow Rider 3D I ran into the same confusion with a UPS HAT (not sure if it was V3), and the GPIO mapping tripped me up. On my Pi 4, GPIO6 (BCM) wasn’t the same as physical pin 6, and the wik...

Apologies if this is obvious, but I haven't managed to come across anyone doing so as yet -   Given I'll be pushing my Pi5 fairly hard, I was hoping to install the Geekworm X1202 UPS board a...

@ragdoll hit Hey, I've been testing on the X1004 board too and noticed similar temps—around 50–55°C idle for some NVMe drives isn't unusual, especially without dedicated heatsinks o...

To control the ATX power for servers connected to an X680 using Redfish, follow these steps: Check Configuration: Ensure the X680 is set up to recognize multiple nodes. If only ID 0 is visible...

That’s a great breakdown — built-in lens protectors really do make a difference. I like how Zapvi integrates them without compromising camera quality or adding extra bulk. @ball orbit ...

114

 Double-check power supply requirements and ensure the bootloader (e.g., EEPROM) is up to date. Also, verify PCIe lanes are enabled in firmware—some boards need specific overlays. @Monke...

I’d suggest testing the NVMe drive in another system if possible to rule it out. @doodle jump

How would you like to assemble them?

Hello No possibility  

It's a bummer that the X630-A4 can't be adapted for the Raspberry Pi 4.

@slope Not exactly like the Pi 5 yet. Most Pi 4 NVMe cases are plastic or have limited passive cooling. 

hello

hello

Hello, I am curious where I might be able to source the 2 or 4 wire pigtails that plug into the 5v in/out and momentary switch on the x735.