Try to check that the USB cable is securely plugged into both the X876 and your computer. Try using a different USB cable or port to see if that helps. https://geekworm.com/community/forum/topic/8...

Hi all, I've got a X876 all built and setup with enclosure and fan and everything seems ok. The system boots, fan turns and usb JMicro thing is recognised. I cannot get the disk to be recognised i...

I'm looking at running one of the BSD's on an RPi, I have the following hardware in addition to the RPi 4 B 8gig.  Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.1 ...

Thank you Lisa ZHANG for a very detailed and clear answer 8 Ball Pool

We are sorry to say that we haven't tried it yet. We are unable to provide any sort of guarantee that the ice tower fan will be compatible with it. drive mad

Sometimes I also get disconnected while playing smash karts. I don't know if you are having this problem or you are referring to another problem.

Sometimes, I also get this problem.

I have a similar situation. Donkey Kong

Ok..... so when i buy the N300 case and the X728 V2.3....the question is do i have all needed screws and spacers includet? And will https://www.amazon.de/dp/B087J7WTYM/?coliid=I3UN6TWZYWBKP1&am...

I have a working kit. However I only get video using an HDMI-HDMI lead. When I use an HDMI-VGA lead there is "No signal".  This same lead works fine to a monitor. I am trying others - as Am...

@Peter D  Hi sir,Really sorry there is no UPS hat can combine with the NASPi Gemini 2.5 kit to use together.best regards,Cindy

@quarreller quarreller Hi sir,First, we think the N300 case is enough for passive cooling.We do not test if the X728-A1 is ok for the combination, it seems OK, but may need to use proper spacer st...

Hello, first excuse my english. Iam planning to buy the N300 case(nice optic) and the X728 v2.3 ups....I know both fits. My question is...can i use the X728-A1 cooler in this combination too?And...

I'm interested in the NASPi Gemini 2.5, but can't work out if there any UPS hats that are compatible with it. I assume from looking that the X728 isn't compatible as that sits on top of the Pi, and...

@Andrew Fitzpatrick Hi,Yes, the X728 can use with X715 together.But please do not stack them via GPIO, in case any wrong operation to damage the boards. You can use the XH2.54 2pin cable to connec...

I guess the documentation included with the device is out of date. Found this on the wiki page for the 715: Hi，You can use X728 UPS board + X715 ; X728 UPS board added power input connecto...

The wiki page for the X728 states: Added power input connector, which can be used with X715 to achieve 6~60V wide voltage input. So I bought a X728 and a X715.  When I go them the sheet ...

@Harry Huang Hi Harry, I need it to be a simple on off switch for non-techincal people to use. They wont be expected to understand 3 different options. Also the force shutdown option is better beca...

OK Switched to mail support. Will post the final result here to help others...

Several button operations： Press the button to turn on Press the button and hold for 1~2seconds to reboot Press the button and hold for 3~7seconds to implement safe shutdown Press the button ...