Hello! I have slow mouse response on my PIKVM. I've found how people fix it, but I cant make it on my PIKVM.Please, help me, I use linux system first time and maybe I don't understand some key-comm...

Detaching the battery after shutdown requires a tweak that is specific to the hardware configuration and battery geometry dash lite attachment method of the X728 board.  The three-second butto...

I'm not sure there's a diagram for you, let's explore Papa's freezeria  

Great, thank you for sharing, join wordle hint to get the most accurate answer.     

A PoE splitter that splits the Ethernet and power signals is an option. While the Ethernet connection is utilized for network connections, the PoE splitter will separate the power from the Ethernet...

ATX cable is an ordinary network cable, but the line sequence must be 568B

1) Can the input be switched thru a GPIO command (and not just ctrl-ctrl-x)? == No. 2) Does the ATX control follow the selected input?  ==Yes. 3) Can the ATX control be selected via GPIO? ...

1) Can the input be switched thru a GPIO command (and not just ctrl-ctrl-x)? 2) Does the ATX control follow the selected input?  3) Can the ATX control be selected via GPIO? 4) Is the cable...

Is the P3 connector inside the X680 V1.2 connected to any of the GPIO pins on the PI? Also, does the IO12, IO14, and IO15 connect to the PI GPIO pins (I assume so, but I wanted to be sure). Is the...

My x735 v2.5 software on RPI 4 - 64 gb run for angry gran is ok and there is no problem.

I appreciate your comments. No one will be punished for posting on our wiki. You may provide comments on anything included on the wiki. Many others will be able to refer to your thoughts on this si...

@rooftop snipers Let's contact with supporter to solve your problem! I think that they can help you.

Hi,   I saw some other people having this problem too, was there ever a fix for this? The power works on the USB ports of my x306, but not the data, so I can't get anything to connect via US...

@Cindy Ding Thanks for the reply! Yes, OMV supports RAID, but the reason I took the NASPI board is also because of the hardware RAID provided, so by Geekworm docs I shorted the RAID switch to RAID...

@Dimitris Christopoulos Hi, we suggest you can ask for help from the Orange Pi official, thanks!

@Gianni D'Alonzo Hi,We haven't specifically tested OMV, but the OMV system itself supports software RAID. It can be set to PM mode and try the OMV software RAID. If you want to test (NASPi Gem...

Hi all, I've recently set up a 3.5" RAID1 board, OS is installed, RAID switch is set, partition is formatted and I can use the drive as I wish. I'm using Raspbian OS Lite 64 bit + Openmediavault ...

Hello,  anyone found a m.2 toggle that works perfect with android and ubuntu on opi5 plus ?

I made the mistake:As for turning OFF my PC, I can connect those KVM ATX contactors ....

@Harry Huang 1) You want to say that KVM gives the signal like it is just a mouse and keyboard? Can this device disguise itself as a keyboard and mouse?2) But why I can't control the power sup...