@Rafael Reis Hi friend, really sorry the X630-A4 can't replace X630-A3, and we suggest you can just order the X630-A3 board to use the kit with Raspberry Pi 4. If you need the X630-A3, you can cont...

I bought 2 PiKVM-A4 Kit for Raspberry Pi Zero 2 W I've been struggling to find another Zero 2 W to build my second PiKVM. I have a Pi4 I could repurpose to be used as the second PiKVM. Although ...

It's great Refer to: https://geekworm.com/collections/ups-hat/products/for-raspberry-pi-4-x862-m-2-ngff-sata-ssd-shield-x857-c1-case-x708-ups-power-mgnt-board-dc-5v-4a-power-supply-kit avatar game

Thanks for sharing this great official documentation. I'll leave you a message after reading about it. https://geekworm.com/community/forum/topic/78220/pikvm-faqbitlife

@cubes 2048 1. Edit /boot/config.txt and add below codes. dtparam=i2c1=on dtparam=i2c_arm=on 2.  Edit /etc/modules-load.d/raspberrypi.conf and add below code. i2c-dev 3. install packag...

@pizza tower: No, the NASPi cannot be used for Retrogaming

Hi @Peter Shewood  1. Please help provide the screenshot of run the lsusb and lsblk command via email.2. Can it work if it is connected to the USB2.0 port of the Raspberry Pi motherboard with...

Thanks for your help Or refer to here: https://raspberrypiwiki.com/X835#How_to_stack_X835 papa's pizzeria

Try to check that the USB cable is securely plugged into both the X876 and your computer. Try using a different USB cable or port to see if that helps. https://geekworm.com/community/forum/topic/8...

Hi all, I've got a X876 all built and setup with enclosure and fan and everything seems ok. The system boots, fan turns and usb JMicro thing is recognised. I cannot get the disk to be recognised i...

I'm looking at running one of the BSD's on an RPi, I have the following hardware in addition to the RPi 4 B 8gig.  Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.1 ...

Thank you Lisa ZHANG for a very detailed and clear answer 8 Ball Pool

We are sorry to say that we haven't tried it yet. We are unable to provide any sort of guarantee that the ice tower fan will be compatible with it. drive mad

Sometimes I also get disconnected while playing smash karts. I don't know if you are having this problem or you are referring to another problem.

Sometimes, I also get this problem.

I have a similar situation. Donkey Kong

Ok..... so when i buy the N300 case and the X728 V2.3....the question is do i have all needed screws and spacers includet? And will https://www.amazon.de/dp/B087J7WTYM/?coliid=I3UN6TWZYWBKP1&am...

I have a working kit. However I only get video using an HDMI-HDMI lead. When I use an HDMI-VGA lead there is "No signal".  This same lead works fine to a monitor. I am trying others - as Am...

@Peter D  Hi sir,Really sorry there is no UPS hat can combine with the NASPi Gemini 2.5 kit to use together.best regards,Cindy

@quarreller quarreller Hi sir,First, we think the N300 case is enough for passive cooling.We do not test if the X728-A1 is ok for the combination, it seems OK, but may need to use proper spacer st...