hi i am asking if i could use rpi5 16gb to make a nas with built in battery like
x1009 with 5 sata ssd a raspberry 5 16g with 1 or 3 x-ups1
the x-ups1(s) would be to run the nas atleast 30 min to 1 hour in case of power failure
I know the x1009 needs 12v about 10amps or less to run 5 2.5 inch sata ssd
and usp1 can only poduce 12v 3amp i also found a 12v 12amp psu that might power setup
