@Vitaly Chekryzhev We recommend avoiding the NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility. No problems were found except for the Phison controller.
Lisa ZHANG
Admin
Staff member
78
Posts
110
Profile views
6
Likes
0
Followers
Posts made by Lisa ZHANG
-
Don't recognize / boot from NVME SSD for X1001/X1002/X1000/X1003?posted in General Discussion
-
X885 RAID 0/1posted in General Discussion
Hello， Please backup your data before setup and switch, otherwise you maybe lost your data.1. Inert HDDs to X885 shield and fix it.2. Please connect the X885 to your PC or Raspberry Pi board and k...
-
ICE Tower with vertically mounted Raspberry?posted in General Discussion
Hi,Philip Sorry, we haven't tested that. We cannot guarantee that the ice tower fan will work with it. Best regards Lisa
-
X885 Power connector came offposted in General Discussion
Hello， Realy sorry for the inconvenience. Could you please try soldering it? Thanks for your feedback, we will check the current stock product and improve it. And we have sent you a ...
-
Monitor HDD temperature on Gemini 2.5 V2 via smartmontools?posted in General Discussion
Hello， Maybe you can contact the chip manufacturer for some advice. this their website https://www.jmicron.com/contact Best regards
-
PiKVM FAQposted in General Discussion
@Snuupy Snup Hi， The I2S Audio in（10pin SH1.0 connector） of X630-A3 is for I2S HDMI audio support. But you need a I2S cable.
-
Wire connection of UPS buttonposted in General Discussion
@Jose Legido Martínez Hi，The x728 supports the connection of a 4pin momentary switch, but the safe shutdown function requires an installation script to be realized. Please refer to here for...
-
X820 Kit, Amazonposted in Pre-Sales Questions
Hello，Alex The X820 case has Micro USB and USB-C port, please rest assured to buy. The image shown by Amazon is an old version. And we'll update the correct image right away. Thank you for y...
-
X880 does not detect 3.5 HDDposted in General Discussion
@Shehan Fernando Hi， What power supply are you using? Could you please send us a test video? Thanks
-
X880 does not detect 3.5 HDDposted in General Discussion
Hi， Please use the same type of hard drive,HDD+HDD or SSD+SSD； an error will be reported when using SSD+HDD. PS：It is recommended to use an SD card to install the system.
-
C790 HDMI adapter can be used on JETSON?posted in Pre-Sales Questions
Hello， Thanks for your interest in the Geekworm products, but there is no a HDMI to CSI-2 Module compatibility with Jetson yet.
-
Solicit 【NASPi 】user experience feedback solutionsposted in General Discussion
@Bas I Hello， Thanks for your valuable advice. 1/Our initial design is an ultra-thin and compact case. Considering the thickness of the aluminum radiator, we need to increase the heigh...
-
Does the v3.0 of the x735 still work with latched/toggle switches?posted in General Discussion
@Frederick Brier Geekworm switch size is 19mm, I think 16mm Switch Cover should not fit it.
-
Does the v3.0 of the x735 still work with latched/toggle switches?posted in General Discussion
@Frederick Brier XH2.54 5V OUT connector also not support the latched switch（it’s 4pin connector）. If you want to use an external switch, it is recommended that you buy a momentary swi...
-
Polarity of the DC 5521posted in General Discussion
@Frederick Brier Hello， DC Barrel positive tip. If you try to search [positive] on the wiki page, you will find an answer.
-
X735 Used or Reserved GPIO Pinsposted in General Discussion
Hello， please refer https://wiki.geekworm.com/X735_Hardware
-
PiKVM FAQposted in General Discussion
Hello, This is normal and not a problem with X630-A4. Because the screen will not work if the mirror is used with PI ZERO. PIKVM OS has not solved this problem.If the system fixes it, the scr...
-
X630-C1posted in General Discussion
Sorry, I don't understand what the problem is. Are there any problems with using the X630-C1 Case? Can you provide more details? so that we can provide you with any assistance. Thanks
-
Doubt about my S.LH1080P.PRO.V1.5 HDMI IN LVDS OUTposted in General Discussion
Hello， It does not support HDMI IN to LVDS OUT. The v2.0 version can connect two screens, you can refer to the picture for the connection method：
-
X880 raid 1 hdd spindownposted in General Discussion
x880 does not support spindown; And for feedback from other users, please refer to WIKI：https://wiki.geekworm.com/X880 If there are any updates in the future we will post them on the wiki.
