Hi, Can the fans be controlled? I tried your above method but it's still too noisy and the fans seem to be running 100% is there a program/app that can control this or show me what fans are runnin...

hi,   i would like a follow up with this too! i have my setup with the UPS installed and i'm currently testing to see how long the batteries last before shutdown or complete turn off. Will t...

is the X820 V3.0 compatible with X710 ? and X820 casing ?

Sorry my Pi is a PI 3 B and not 2B

Hello Pi2b + OS Buster last version + last fixes X710 script installed Jumper on 1-3 for automatic boot after power recovery Problems: it does not work with jumper set in 1-3: 1/ x710off does ...

Hi Harry I now have added 1 second sleep to: x728softsd.sh #X728 RTC setting up #sudo sed -i '$ i rtc-ds1307' /etc/modules #sudo sed -i '$ i echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/...

@George Feichter  Hi Try to insert a new line, and type 'sleep 1s' before '#x728 Powering on /reboot /full shutdown through hardware' line;  

@George Feichter  Hi, could you tell me which reaspberry pi image os? pi 3 or pi 4? We don't found some error about script, it's very strange 

Yes, I have buster and all updated.

@Alan DiGiovanni Hi Alan, I just got the same setup and went with a 3.7v 4000mah li-po.  It is about 2" square and I have it attached to the u100 tray with velcro instead of screwing in the ba...

The LVDS to HDMI support 1920*1080,  not 1080*1920

@Vladimir Kushner  Hi,  The resolution of your screen is the reverse screen, 1080*1920, which is the vertical screen resolution. you need to change your LCD to Horizontal screen resolution

Hi! What battery chemistries are supported?  The FAQ & the product page say "Lithium battery", does this include LiPo battery?  Would the Samsung 30Q 18650 battery work? Will this p...

the switch is useless whey AUTO ON is enabled.

@Joseph Brockert 1-Full power off via software is not supported when using an external latching switch. (So when using the external latching switch the software printf "%s\\n" "alias x730off=...

@George Feichter  Do you try to burn the last raspbian image os? 

@james mutch  Thank you for your feedback. Regarding the noise of the fan, we have conducted many tests. We suggest you to try the following: Keep the fan away from the side about 1mm to solv...

Hi Guys, I recently purchased this kit x829-dual-2-5-sata-hdd-ssd-shield-x829-c1-case-x708-ups-power-mgnt-board-dc-5v-4a-power-supply-kit using it with a 4gb pi4b I have assembled this and altho...

@Joseph Brockert  ok, just a few more thing to understand about the x735. The instructions sheet 4 items.....  1-Full power off via software is not supported when using an external latc...

@Harry Huang  Thanks Harry. I have commented the four lines and rebooted, but it still does not shut down the pi or the hat. Please advise. Many thanks.