i plugged the nvme with your board using the blue usb cable supplied into my desktop, nothing happens, blue and red lights are on. No blinking or anything. Nothing shows up in Disc Management. Some...

@Lisa ZHANGInvoice IDc21882619428952.1 Lisa, No, Not Everything will work, not right. It doesn't work. Please Re Read my post and come back to me with a solution. 

@Daniel Unknown Hello， Could you please tell us your order number？ And if you use a usb cable instead of the usb3.0 connector, everything will work, right? 

Assebmled the kit, 735 and 873. Once usb adapter plugged in and power button pressed pi4 boots but no usb devices work and either 873 or my brand new nvme makes a chirping sound.  If i remove...

Thanks, it was userful information, cause it helped me to solve the simmilar issue.Use the help of https://viplikes.net/ to quickly increase the number of instagram followers.

Hi friend, We have replied to your email. If ny questions, you can contact us by email again. We will help you.   1.Could you please try to format the SSD to test again? https://wiki.gee...

Thanks, it was userful information, cause it helped me to solve the simmilar issue.

I recently ordered your NasPi kit on Amazon but am running into a big problem. The raspberry pi is not detecting the 2.5 HDD that I plugged into it with your board. I have the 1.5 version board wit...

Thank you for this post! if you want to write it on your instagram too you can use this site https://soclikes.com to get a lot of likes

Hello，Tony Sorry for the inconvenience, What brand of hard drive are you using？could you please send some test pictures and video by email ？【support@geekworm.com】；and please let us know your order...

I purchased the X857 V2.0 from Amazon. I connected a new mSATA (also purchased from Amazon, and yes the mSATA drive works!). I attached the board to the Raspberry Pi 4 with the included standoffs. ...

  source： https://www.raspberrypi.org/forums/viewtopic.php?t=245931 We have seen reports of extremely degraded performance when using several types of USB3.0 to SSD adapter or when using nat...

Hello，Brent could you please send some installation pictures by email?  and please tell us your order number.thanks.       support@geekworm.com Best regards

Hello， X708 ups cannot be used with X750 ups.  

Sorry for adding a second post, but due to the pandemic, it takes a long time, after it gets to the States, so ordered a lager coolong fan from Amazon, see attached photo:   It is a DV:5v ...

Originally I purchased an x829 with the x735 hat. I did get it working but a couple of days later I received my X708-A1 battery holder and the x708 hat. I fully assembled the unit with the x829 on...

Puis-je utiliser deux X708-A1 et un x750 ups sur une seule carte ups X708 ?

Needed to install git...   

trying to install x735 v2.5 software on RPI 4 - 64 gb and have run into a problem, see below. Not sure what to do as I cant get the cooling fan to work? pi@raspberrypi:~ $ sudo apt-get install pig...

Hello，Because it is a UPS expansion board, please use the battery in accordance with the safety warning.  and please pay attention to the heat dissipation problem to avoid the safety problem o...