Could you please provide more test details and end some pictures or videos？ Thanks

Thsi wound up being the solution for me.  Code: Select all sudo nano /boot/config.txt find:dtoverlay=vc4-kms-v3dadd/change to:dtoverlay=vc4-fkms-v3dby adding an f, this will change th...

The raspbery pi forum was able to answer this for me.  Code: Select all sudo nano /boot/config.txt find:dtoverlay=vc4-kms-v3dadd/change to:dtoverlay=vc4-fkms-v3dby adding an f, this w...

I recently purchased a x825-c8 case and the x825 v2.0 board. Since the description said its for 4TB HDDs  I thought this would be okay. The products arrived, I removed my HDD from its external...

Im looking for some tech support from geekworm, does anyone know the best place for this? I tried the "contact us" link on the webssite but nothing was there. I recently bought the naspi kit from t...

@Lisa ZHANG So I ordered a replacement from Amazon that finally arrived. I reassembled the new unit and still have the same problem. Do you think it is worth reloading Raspian and trying again?

Hello， Please email us, we will send you 3D Cad by email.  support@geekworm.com Best regards

Hi, I recently purchased a Simpsons Arcade1up, when I hook up the Gen 2 Geekworm (V20) board it does not display anything on the Dell 2007fpb monitor.  Has anyone got Simpsons Arcade1up to wor...

We would like to modify the N100 to include the CSI camera mounted inside and would like to start this process with a 3d Cad model of either .step or .igs.  Do you have a place where we can do...

Forgive me for this may be a dumd question but do i need to reburn the firmware to the X-C1  or the raspberry pi itself? Also what is the best way to go about re-burnning the firmware?

Hi,friend Please re-burn the firmware.

I recently purchased and set up your naspi system. I had everything up and running great.  Im booting from the ssd but i also keep an sd card in it with the full desktop version of raspberry O...

Hello， Sorry for the inconvenience.  Please test X883 without X735, please use USB cable to test HDD1, HDD2 respectively.  Could you please send us some test videos？【support@geekworm.c...

I had both of these working fine, built a raid mirror, modified FSTAB to make sure the array booted everytime and got the root account is locked error. Attempts to repair failed so I reloaded the o...

Hello，Vincent please refer to ：X832 3.5'' SATA HDD Shield  + Matching Case X832-C1  https://geekworm.com/products/for-raspberry-pi-4-x832-3-5-inch-sata-hdd-storage-expansion-board?_pos=...

Looking for the correct components for a Pi 4B to house in a case a board for HDD 3.5" / SSD with power switch and Fan. What should I order that is available, say from Amazon UK for quick delivery...

Hi， please refer to【https://wiki.geekworm.com/X728-Software#FAQ】 File:MAX17040-MAX17041.pdf

Hello,I am trying to write a C# interface for teh x728. We have used your 1.1 pro in the past. I need a register map. I realize that 0x02 is voltage, 0x04 is charge, but we used to read what batter...

Hello， NASPi （NUC-style NAS storage solution based on the latest Raspberry Pi 4）is mainly for storage and power management functions, and PWM fans provide cooling functions.  The shell is mad...

Can the NASPi be used for Retrogaming also? Is there something besides the 2.5" slot that makes it NAS specific?