Hi, I recently purchased a Simpsons Arcade1up, when I hook up the Gen 2 Geekworm (V20) board it does not display anything on the Dell 2007fpb monitor. Has anyone got Simpsons Arcade1up to wor...
All Posts
-
3d Cad Model for Geekworm N100
We would like to modify the N100 to include the CSI camera mounted inside and would like to start this process with a 3d Cad model of either .step or .igs. Do you have a place where we can do...
-
no hdmi output
Forgive me for this may be a dumd question but do i need to reburn the firmware to the X-C1 or the raspberry pi itself? Also what is the best way to go about re-burnning the firmware?
-
-
no hdmi output
I recently purchased and set up your naspi system. I had everything up and running great. Im booting from the ssd but i also keep an sd card in it with the full desktop version of raspberry O...
-
X883 + X735 issues
Hello, Sorry for the inconvenience. Please test X883 without X735, please use USB cable to test HDD1, HDD2 respectively. Could you please send us some test videos?【support@geekworm.c...
-
X883 + X735 issues
I had both of these working fine, built a raid mirror, modified FSTAB to make sure the array booted everytime and got the root account is locked error. Attempts to repair failed so I reloaded the o...
-
Pi 4B with case + HHD board and power switch + fan etc
Hello,Vincent please refer to :X832 3.5'' SATA HDD Shield + Matching Case X832-C1 https://geekworm.com/products/for-raspberry-pi-4-x832-3-5-inch-sata-hdd-storage-expansion-board?_pos=...
-
Pi 4B with case + HHD board and power switch + fan etc
Looking for the correct components for a Pi 4B to house in a case a board for HDD 3.5" / SSD with power switch and Fan. What should I order that is available, say from Amazon UK for quick delivery...
-
X728 data sheet.
Hi, please refer to【https://wiki.geekworm.com/X728-Software#FAQ】 File:MAX17040-MAX17041.pdf
-
X728 data sheet.
Hello,I am trying to write a C# interface for teh x728. We have used your 1.1 pro in the past. I need a register map. I realize that 0x02 is voltage, 0x04 is charge, but we used to read what batter...
-
Can NASPi be used for Retrogaming also?
Hello, NASPi (NUC-style NAS storage solution based on the latest Raspberry Pi 4)is mainly for storage and power management functions, and PWM fans provide cooling functions. The shell is mad...
-
Can NASPi be used for Retrogaming also?
Can the NASPi be used for Retrogaming also? Is there something besides the 2.5" slot that makes it NAS specific?
-
T208 battery gauge
Hello,sir T208 :integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c) Reading current is not supported. Best regards Lisa
-
Can I fit an ice tower cooler in this kit?
Hello, This kit does not support the installation of ice tower cooler. X708 UPS with fan, can meet the cooling conditions of Raspberry Pi. Best regards Lisa
-
Can I fit an ice tower cooler in this kit?
https://geekworm.com/collections/ups-hat/products/for-raspberry-pi-4-x862-m-2-ngff-sata-ssd-shield-x857-c1-case-x708-ups-power-mgnt-board-dc-5v-4a-power-supply-kit I'd really like all this...
-
T208 battery gauge
Hi, Which exact type of battery gauge is used in Jetson T208 UPS? Is it possible to read anything additional to battery voltage and capacity? Current for example? Best regards, Victor Belov
-
X873 V1.2 M.2 NVME SSD Expansion Board for Raspberry Pi 4 Model B
@Lisa ZHANG friday night funkin Hello,Yes,X873 board compatibles it WD M.2 2280 Nvme SSD Thanks for your answer. It helped me a lot.
-
Issues with installation of X-C1 fan software.
@David Artiss Hi, You don't need to install 'python-smbus' in the new version, please ignore it. But it's needed to install'python-smbus' in the previous version, so we keep it.
-
X857 V2.0 Does Not Work with Raspberry Pi 4B
Bonjour j ai recu les connecteur usb je vous remerci