Sorry my Pi is a PI 3 B and not 2B

Hello Pi2b + OS Buster last version + last fixes X710 script installed Jumper on 1-3 for automatic boot after power recovery Problems: it does not work with jumper set in 1-3: 1/ x710off does ...

Hi Harry I now have added 1 second sleep to: x728softsd.sh #X728 RTC setting up #sudo sed -i '$ i rtc-ds1307' /etc/modules #sudo sed -i '$ i echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/...

@George Feichter  Hi Try to insert a new line, and type 'sleep 1s' before '#x728 Powering on /reboot /full shutdown through hardware' line;  

@George Feichter  Hi, could you tell me which reaspberry pi image os? pi 3 or pi 4? We don't found some error about script, it's very strange 

Yes, I have buster and all updated.

@Alan DiGiovanni Hi Alan, I just got the same setup and went with a 3.7v 4000mah li-po.  It is about 2" square and I have it attached to the u100 tray with velcro instead of screwing in the ba...

The LVDS to HDMI support 1920*1080,  not 1080*1920

@Vladimir Kushner  Hi,  The resolution of your screen is the reverse screen, 1080*1920, which is the vertical screen resolution. you need to change your LCD to Horizontal screen resolution

Hi! What battery chemistries are supported?  The FAQ & the product page say "Lithium battery", does this include LiPo battery?  Would the Samsung 30Q 18650 battery work? Will this p...

the switch is useless whey AUTO ON is enabled.

@Joseph Brockert 1-Full power off via software is not supported when using an external latching switch. (So when using the external latching switch the software printf "%s\\n" "alias x730off=...

@George Feichter  Do you try to burn the last raspbian image os? 

@james mutch  Thank you for your feedback. Regarding the noise of the fan, we have conducted many tests. We suggest you to try the following: Keep the fan away from the side about 1mm to solv...

Hi Guys, I recently purchased this kit x829-dual-2-5-sata-hdd-ssd-shield-x829-c1-case-x708-ups-power-mgnt-board-dc-5v-4a-power-supply-kit using it with a 4gb pi4b I have assembled this and altho...

@Joseph Brockert  ok, just a few more thing to understand about the x735. The instructions sheet 4 items.....  1-Full power off via software is not supported when using an external latc...

@Harry Huang  Thanks Harry. I have commented the four lines and rebooted, but it still does not shut down the pi or the hat. Please advise. Many thanks.

@Harry Huang No problem. This is AMOLED Display 5.5 inch WaveShare production. https://www.waveshare.com/5.5inch-HDMI-AMOLED.htm

@Arvid Jedlicka Please check or resolder it.

@Vladimir Kushner  hi, Could you tell us more AMOLED  display information?