No Products in the Cart
Before you read on i have submitted an email to Cindy in hope that something is either faulty or simply a bad manufaturing design or simply incompatible setup that is causing major issues. ...
Before you read on i have submitted an email to Cindy in hope that something is either faulty or simply a bad manufaturing design or simply incompatible setup that is causing major issues. ...
Hi George, I ran through this thread and the x708 software wiki page and started again. Your script works when i pull the power adapter from my case and the x708 shuts down :) Is there anyway to ...
Hi George, Thanks for your patience. Because i have a different setup from yours i'm assuming this could be the problem. Your script does work when you pull the power plug out to th extent ...
i've already done the sudo chmod 755 xxx.sh with file. Is there a way to double check it does have permission? i have also done the reboot after everything you suggest but the x708 does not shut of...
Hi, I've installed the script and hashtagged all the lines that were in rc.local apart from the last 3. It looks like the shutdown part works after 30 seconds when i pull the power adapter out but...
Thought i would ask another question regarding bluetooth...i seem to be having difficulty connecting to a bluetooth keyboard. The only way i can get it to connect is to have the keyboard directly a...
so the text line that contains echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_devicehwclock -s i need to put a hashtag infront of all of these? Any idea what these are? I recently install...
here is my code for rc.local #!/bin/sh -e## rc.local## This script is executed at the end of each multiuser runlevel.# Make sure that the script will "exit 0" on success or any other# value on err...
Hi George, I did everything you said in the post but for some reason when i run the test and pull the power plug when the pi logo shows it shows a black/blank screen for about 30+ seconds and boot...
Apollogies for constant replies as i can't seem to amend my post above to add stuff :/ Anyways... when you said that it has shutdown and won't get a response from command line does this mean...
George.... how long a runtime are you getting with just 2 batteries connected? What is the average time of 2 x 2000mah batteries on this setup running before shutdown?
Hi George, I'm assuming this is the same for when the power supply is still on and connected too much like the battery backup? It really renders my whole setup useless as it doesn't function as a...
I've created the script and done as you've said however, how will i know if it works or not if the normal shutdown or auto-Shutdown is not working? Thanks
Hi, Can the fans be controlled? I tried your above method but it's still too noisy and the fans seem to be running 100% is there a program/app that can control this or show me what fans are runnin...
hi, i would like a follow up with this too! i have my setup with the UPS installed and i'm currently testing to see how long the batteries last before shutdown or complete turn off. Will t...
Hi Guys, I recently purchased this kit x829-dual-2-5-sata-hdd-ssd-shield-x829-c1-case-x708-ups-power-mgnt-board-dc-5v-4a-power-supply-kit using it with a 4gb pi4b I have assembled this and altho...
Hi Guys, Newbie here so take it easy on me.... anyways, can you recommend a setup that utilises the M.2 NGFF and also using either a single or dual SATA storage option or all of them? I'm looking ...