@Khalid Mateen    Hi,  https://www.openmediavault.org/ https://www.addictivetips.com/ubuntu-linux-tips/set-up-openmediavault-on-raspberry-pi-4/   Thanks.  

The total height of X728 will be a problem, so we developed X708

hi, No according case for X728. Recommend: X825+SSD+rpi4b+x708+x825-c7 https://geekworm.com/collections/new-arrivals/products/for-raspberry-pi-4-x825-2-5-sata-hdd-ssd-shield-x825-c7-case-x708-up...

@Thomas Grueger Sorry. X827 doesn't support stack, maybe you can consider X828 or X835 

@Tom Mynar we will email to you about LED questions.

@Tom Mynar  Hi, we think the LED of X828 is on the 'front'. you can refer to 

@Tom Mynar  Hi, Maybe you can try OpenMediaVault .  

Which Linux distro is everone using for NAS/SAMBA environment ? I've started with the octopi Raspi just comes it comes small and fits well. However, it is very unpredictable rebooting when the wi...

The LEDs on the x828 board are on the "rear" of the units (assuming the USB ports are considered the front).  I would like to connect external LEDs to the boards.  When I removed one of t...

Hi folks, who knows if multiple X872 boards are stackable to build a NAS? Does anyone have a solution building a NAS with 2 oder 4 NVMe using Geekworm boards? Greetings from Germany Thomas  

It took a bit of hardware hacking, but I succeeded in putting a SSD, X825, RPi4B and a X728 into a X825-C6 case. It is now at the heart of my smarthome running on Domoticz more reliably than ever! ...

Hi,  Sorry, what's the conbee?

  Hi everyone,this is my configuration: X735 + X857 + Pi 4 + conbee + DC 5v 4a with HASSIO board.(at the moment X857 mSata is disconnected and not powered because I would ...

Hello sir, Really sorry, the X825-C6 case does not support X728+X825+Pi 4. There is no design case for this  kit(X728+X825+Pi 4). Best regards, Cindy/Geekworm

Hi Geekworm, Before I buy some X835 boards, I have a couple questions: 1. In either 2 or 4 stacked, does the PI see 2 / 4 drives or one HDD? 2. In 2 stacks, is there any RAID5 available? 3. In ...

Hello All,   New to Linux Distros and recently purchased the kit for X825 and 735 cards for a Raspberry Pi OS on SATA SSD drive.  Is there any instruction  online on how to install...

Dear Sirs, I have 2 boards (https://geekworm.com/products/raspberry-pi-hdmi-to-csi-2-adapter-board-with-15-pin-ffc-cable) and trying to implement HDMI capture on my Raspberry PI 3, including sound...

I just got my X725 + X825 + C6 metal case + power supply today and it all seems to be working nicely with my RPi4B, but I noticed that there is still one thing missing in my setup: a battery backup...

@Sterling Crapser  Your understand is right. Only press the button of X735 to supports safe shutdown.   Regards.