hi,  Thanks you very much. Pin to Top;  

Hi,  I think your idea is achievable,  X735 only provide the 730off command to achive save power off, but no X735reboot.   Chrontab  + reboot  

Hi, Sorry for late reply. Only one X735 can meet your request. Thanks.

hi, Please refer to :

Hi, Thanks for your support. The correct power way is TYPE C port or DC 5525 Jack in X728 Hat, we don't use micro USB because of the low current limit of the micro USB connector (Max. is only 2.5A...

The documentation for the X728 states not to use the micro usb to power the pi, or to use the USB-C port. I am however quite confused by this. What is the proper way to charge the batteries in the ...

I'm having similar issues, but I don't think PSU voltage is the root in my case. I bought the kit that includes X832, metal case and 12V@5A PSU, therefore I assume voltage issues are out of questio...

This Forum is complety dead or what?, I think I find a whay of doing what I whant with only 1 component

@Marco Dittmann Hi friend, Please refer to the PCB layput of T208: https://raspberrypiwiki.com/T208#/media/File:T208-PCB.png Hope it will help. Best regards, Cindy/Geekworm

Hi, im interested in buying a T208 18650 UPS for my robotic project. Are there any CAD files available (older versions will help too)? I want to add it to my robot model, and not creating one from...

Hi, I recently buy a X825 Board and hooked it to my Pi4, there is any whay I can put only 1 button to power the board on (including the Pi) and then use the same button to Power the Pi off and afte...

Hi folks, Just a quick question, Can i still use Chrontab to set up an automatic reboot of the raspberry pi eventhough there will be a power button used? I intend on setting up the Raspberry pi ...

Hi All I struggled with setting up a Raspberry Pi 4 "boot from SSD" system. I now have 4 "systems" running on Ubuntu Arm64 20.10 with the X825 SSD board, X735 power board enclosed in a X825-C6 cas...

Hello I bought an X829 card for the purpose of making a NAS. I have connected two 2TB hard drives but they are never recognized by the OS. I tried with Raspberry Pi OS 32 bit and 64 bit, with one ...

Hi friend, 1. When use the X735 with X825, there is no need to put on any jumper caps, just remove all the jumer caps on X735. 2. ABOUT how to boot from ssd, please refer to here: https://raspber...

@John Fulton  I have gotten the X735 to turn the Pi4 on, I had the momentary switch attached the the latching switch connection.  Also the Pi will recognize the ssd drive.  But I wou...

I recently purchased a  X825, X735 and X825-C2 case with momentary power switch.  I am confused how to set the jumpers, which jumps should be connected on both the X825 and X735 boards? &...

Hi I need this solution for my car, also. But i have a X728.Script seems to works ok, but if i study the behavior on shutdown, the X728 shuts down BEFORE the PI. That is no good. Running Buster, ...

@li xia  Yes, as i mentioned in first post. I followed the guide on two Rpi4s. Only the Rpi3 worked.  

@li xia hello Could you tell what the GPIO5, GPIO12 and GPIO13 are used for? Thanks you.