Hello...thanks for sharing this information. I’ve run a NAS on a Pi 3B+ happily to slow HDD and even run SAMBA on Pi Zero W boxes for development and small transfers but my main NAS is a beef...

I add here the exchange of mails I had with Suptronics who builds the boards. My mail : I intend to mount a pretty classic NAS Raspberry stack with 3 HDDs I currently own (1x1TB + 2x500GB). Th...

Hi Aymeric, You might be interested in the answer @Harry Huang posted on my topic. Au passage, tu sembles français, si t'es pas loin de Rennes on peut mutualiser les frais de port et tente...

Hi @Harry Huang, Thanks a lot for this detailed answer :-) Best regards,Alexis.

Maybe you can understand our NAS family products more clearly Please refer to Raspberry pi 4 NAS Storage Family      

@Jeff Kay Hi, thanks for your good advise. I add the UPS board and 18650 battery holder on X829-C1, the cooling fan is assembled on the side of case. X829-C1  is only for X829

@William Shelnut You can use multi X835 board to stack them, we don't announce that X835 is stackable because we are customizing the USB 3 cable ^_^, in fact, X835 is stackable. BUT you need to DIY...

@William Shelnut Don't use X835 with X828, they use the different voltage, please refer to Power Requirement

Hi Alexia Thanks. 1. X835/X835 is only for 3.5 inch HDD, and X835/X835 require DC 12V, BUT x828/x829 is for 2.5 inch SSD/HDD, so don't use them together. 2. X829 and X828 cannot be mixed, x828 s...

Hello, I have 4 HDD: 1x 3.5 2x 2.5 1x 2.5 USB (some weird none SATA connector sadly)   Is it possible to stack them with these products: https://geekworm.com/collections/new-arriv...

Hi all, I plan to mount a 4GB Raspberry Pi 4b with two 2,5" HDD (1TB + 500GB) that I currently own. I intended to go for your full Raspberry Pi 4 Model B+2Pcs X828 2.5" SATA HDD/SSD Cluster Stora...

Thanks for the pic, right now i'm just waiting for the new X835 to arrive. My Pi4 system is stacked from bottomto top as follows X828 (1Ea) (and 1 Waiting for new SSD) then the PI 4 then the X735 p...

@Joseph Bodhorn realized after I added a second comment to my own post that probably burned the wrong backup to the disk I was using, uname - a is now "Linux retropie4 4.19.97-v7l+ #1294 SMP Thu J...

@Joseph Bodhorn with batteries in and the jumper set to auto on my pi 4 won't boot after a full shutdown, reboots still work fine. No matter how long I hold the power button down the led's on the x...

@William Shelnut can't speak on the 835, I just got my boards yesterday and I had to get creative using both an 828 and a 750 on my pi 4

I've added the jumper for the auto power on function and my pi 4 now reboots just fine. I'm having an issue with starting the pi after a full shutdown. The pi does not want to start after being shu...

Has anyone been able to stack the X828 2.5 SSD board on top of the X835 3.5 HDD board?

@Harry Huang I did just that and rerouted it to GPIO 27.  It works but I think I will use other methods to shut down the pi as you mentioned.  thanks