@Harry Huang  Hello, I have assembled my computer and have several questions. 1. I did not attach the X872 USB bridge until after I installed the Raspberry Pi O/S.  I tried to power th...

@Gary Ching Hi, Thanks. Yes, There will be unpredictable issues. Please DON'T power directly the pi via type C. Only power the X735 via DC or TYPE C. Best Harry

Thanks. In fact, this case will supports UPS,  so we reserve the 18650 battery hold installation position in this case. Best. Harry

Hi, Alex Thans for your question. The Matching metal case is designing. please pay attention to us. Best, Harry

So I have the x735 along with x825 boarad. I power the system through the x735 as your instructions state. My question is if I hook the pi to a pc via the USB-c port will there be any issues if the...

Question is answered by the post (Raspberry pi 4 NAS Storage Family).  Thanks!  Wish I had seen it sooner.

Hello, I have a question on how to attach power for the X857-C1 case fan that mounts to the right side (viewed from the back) of the case.  I have attached the power for the X872 to the 5V (o...

Hello. I was wondering if you planned to create a metalic case that would support this fan https://geekworm.com/collections/raspberry-pi-4/products/raspberry-pi-4b-3b-3b-ice-tower-cpu-cooling-fan...

Hello Alexis, Thank you for the follow-up !

Hello...thanks for sharing this information. I’ve run a NAS on a Pi 3B+ happily to slow HDD and even run SAMBA on Pi Zero W boxes for development and small transfers but my main NAS is a beef...

I add here the exchange of mails I had with Suptronics who builds the boards. My mail : I intend to mount a pretty classic NAS Raspberry stack with 3 HDDs I currently own (1x1TB + 2x500GB). Th...

Hi Aymeric, You might be interested in the answer @Harry Huang posted on my topic. Au passage, tu sembles français, si t'es pas loin de Rennes on peut mutualiser les frais de port et tente...

Hi @Harry Huang, Thanks a lot for this detailed answer :-) Best regards,Alexis.

Maybe you can understand our NAS family products more clearly Please refer to Raspberry pi 4 NAS Storage Family      

@Jeff Kay Hi, thanks for your good advise. I add the UPS board and 18650 battery holder on X829-C1, the cooling fan is assembled on the side of case. X829-C1  is only for X829

@William Shelnut You can use multi X835 board to stack them, we don't announce that X835 is stackable because we are customizing the USB 3 cable ^_^, in fact, X835 is stackable. BUT you need to DIY...

@William Shelnut Don't use X835 with X828, they use the different voltage, please refer to Power Requirement

Hi Alexia Thanks. 1. X835/X835 is only for 3.5 inch HDD, and X835/X835 require DC 12V, BUT x828/x829 is for 2.5 inch SSD/HDD, so don't use them together. 2. X829 and X828 cannot be mixed, x828 s...

Hello, I have 4 HDD: 1x 3.5 2x 2.5 1x 2.5 USB (some weird none SATA connector sadly)   Is it possible to stack them with these products: https://geekworm.com/collections/new-arriv...