@Joseph Brockert 1-Full power off via software is not supported when using an external latching switch. (So when using the external latching switch the software printf "%s\\n" "alias x730off=...
All Posts
-
-
x708 software power shutdown
Harry Huang posted in General Discussion •@George Feichter Do you try to burn the last raspbian image os?
-
Fan Noise
Harry Huang posted in General Discussion •@james mutch Thank you for your feedback. Regarding the noise of the fan, we have conducted many tests. We suggest you to try the following: Keep the fan away from the side about 1mm to solv...
-
Fan Noise
james mutch posted in General Discussion •Hi Guys, I recently purchased this kit x829-dual-2-5-sata-hdd-ssd-shield-x829-c1-case-x708-ups-power-mgnt-board-dc-5v-4a-power-supply-kit using it with a 4gb pi4b I have assembled this and altho...
-
x735 Power
Joseph Brockert posted in General Discussion •@Joseph Brockert ok, just a few more thing to understand about the x735. The instructions sheet 4 items..... 1-Full power off via software is not supported when using an external latc...
-
x708 software power shutdown
George Feichter posted in General Discussion •@Harry Huang Thanks Harry. I have commented the four lines and rebooted, but it still does not shut down the pi or the hat. Please advise. Many thanks.
-
Problem with VLDS-HDMI converter connection
Vladimir Kushner posted in General Discussion •@Harry Huang No problem. This is AMOLED Display 5.5 inch WaveShare production. https://www.waveshare.com/5.5inch-HDMI-AMOLED.htm
-
X825 appears to be DOA
Harry Huang posted in General Discussion •@Arvid Jedlicka Please check or resolder it.
-
Problem with VLDS-HDMI converter connection
Harry Huang posted in General Discussion •@Vladimir Kushner hi, Could you tell us more AMOLED display information?
-
X825 appears to be DOA
Harry Huang posted in General Discussion •@Arvid Jedlicka Hi, sorry for your problem. We can't get more information from your description, maybe X825 is damaged?
-
x708 software power shutdown
Harry Huang posted in General Discussion •@George Feichter Hi, sudo nano x728.sh #because X708 doesn't support RTC function, so we need to remove or comment out (add # at the beginning of the line) the following 4 lines #...
-
x708 software power shutdown
George Feichter posted in General Discussion •Hi I have the x708 (but waiting for a battery to arrive). I am trying to shut down the RPI by doing the following: cd / cd x728 x728off All I am getting is: on the first try - "X728 Shutting...
-
Problem with VLDS-HDMI converter connection
Vladimir Kushner posted in General Discussion •Hello! Who has an expierence with using these printing board: S.LH1080P.AUDIO.V20? The fact is that when you connect an AMOLED display, the image is heavily smeared with stripes. If you conn...
-
X825 appears to be DOA
Arvid Jedlicka posted in General Discussion •I purchased two X825's and Geekworm 5V 4A Power Modules thru Amazon. I've set both of them up, each of them with a different Pi 4 4GB. Both systems are configured the same way with a 250GB SSD. P...
-
x735 Power
Harry Huang posted in General Discussion •@Joseph Brockert YES, you are right. all are 5V
-
x735 Power
Cindy Ding posted in General Discussion •@Joseph Brockert Hello sir, The X735 only support 5V input via USB-C, USB-micro and a 5.5x 2.5mm plug. Here is the DC 5V 4A PSU can be used for X735: https://geekworm.com/products/dc-5v-4a-power-ad...
-
x735 Power
Joseph Brockert posted in General Discussion •The x735 can be powered from USB-C, USB-micro and a 5.5x 2.5mm plug. USB-C and USB-Micro are 5vdc. What voltage is the 5.5 x 2.5 mm plug that is listed as supporting 4amps. The DC 5.5 x 2.5 m...
-
-
Looking to setup a NAS Storage after seeing Geekworms setup online!
james mutch posted in General Discussion •Hi Guys, Newbie here so take it easy on me.... anyways, can you recommend a setup that utilises the M.2 NGFF and also using either a single or dual SATA storage option or all of them? I'm looking ...
-
x829 lost hdd connection
Harry Huang posted in General Discussion •@Alexandre Ladeira Hi, Thanks Have you considered insufficient power supply? Regards
