Hi, Please refer to the following picture:

@Alan DiGiovanni Hello sir, You can also use the battery without built-in protective circuit.

Hello sir, Sorry, there is no design metal case for Pi3 + X730 + X850, but you can use the HAT size acrylic case: https://geekworm.com/products/raspberry-pi-universal-stackable-hat-size-acrylic-c...

Thanks for your advice

Hello, i want to power my X825 from a 5V power board and would like to avoid to connect anything to the barrel connector (to save space - the power board will be placed inside the case). I read i...

I purchased the dual sata drive kit with the X708 power backup board.  The Wiki says you must use only Li-ion batteries with a built-in protective circuit that may be no longer than 65.3 mm. &...

My setup is: raspberry pi 4 + x829 + 2 1Tb SSD, and after a certain amount of time those 2 SSD are not acessible to transmission (bittorrent client), nor via ssh. The only way to get access to then...

@ILLIA DAVYDOV  Hi,  No I2S support.

Guide: https://www.addictivetips.com/ubuntu-linux-tips/set-up-openmediavault-on-raspberry-pi-4/  

@Khalid Mateen    Hi,  https://www.openmediavault.org/ https://www.addictivetips.com/ubuntu-linux-tips/set-up-openmediavault-on-raspberry-pi-4/   Thanks.  

The total height of X728 will be a problem, so we developed X708

hi, No according case for X728. Recommend: X825+SSD+rpi4b+x708+x825-c7 https://geekworm.com/collections/new-arrivals/products/for-raspberry-pi-4-x825-2-5-sata-hdd-ssd-shield-x825-c7-case-x708-up...

@Thomas Grueger Sorry. X827 doesn't support stack, maybe you can consider X828 or X835 

@Tom Mynar we will email to you about LED questions.

@Tom Mynar  Hi, we think the LED of X828 is on the 'front'. you can refer to 

@Tom Mynar  Hi, Maybe you can try OpenMediaVault .  

Which Linux distro is everone using for NAS/SAMBA environment ? I've started with the octopi Raspi just comes it comes small and fits well. However, it is very unpredictable rebooting when the wi...

The LEDs on the x828 board are on the "rear" of the units (assuming the USB ports are considered the front).  I would like to connect external LEDs to the boards.  When I removed one of t...

Hi folks, who knows if multiple X872 boards are stackable to build a NAS? Does anyone have a solution building a NAS with 2 oder 4 NVMe using Geekworm boards? Greetings from Germany Thomas