So I have the x735 along with x825 boarad. I power the system through the x735 as your instructions state. My question is if I hook the pi to a pc via the USB-c port will there be any issues if the...
All Posts
-
X872/X735/X857-C1/RPi4 Question
Question is answered by the post (Raspberry pi 4 NAS Storage Family). Thanks! Wish I had seen it sooner.
-
X872/X735/X857-C1/RPi4 Question
Hello, I have a question on how to attach power for the X857-C1 case fan that mounts to the right side (viewed from the back) of the case. I have attached the power for the X872 to the 5V (o...
-
Ice-Tower CPU Cooling Fan Metalic Case
Hello. I was wondering if you planned to create a metalic case that would support this fan https://geekworm.com/collections/raspberry-pi-4/products/raspberry-pi-4b-3b-3b-ice-tower-cpu-cooling-fan...
-
Chaining HDD Hats
Hello Alexis, Thank you for the follow-up !
-
Raspberry pi 4 NAS Storage Family
Hello...thanks for sharing this information. I’ve run a NAS on a Pi 3B+ happily to slow HDD and even run SAMBA on Pi Zero W boxes for development and small transfers but my main NAS is a beef...
-
Is X829 stackable?
I add here the exchange of mails I had with Suptronics who builds the boards. My mail : I intend to mount a pretty classic NAS Raspberry stack with 3 HDDs I currently own (1x1TB + 2x500GB). Th...
-
Chaining HDD Hats
Hi Aymeric, You might be interested in the answer @Harry Huang posted on my topic. Au passage, tu sembles français, si t'es pas loin de Rennes on peut mutualiser les frais de port et tente...
-
Is X829 stackable?
Hi @Harry Huang, Thanks a lot for this detailed answer :-) Best regards,Alexis.
-
Raspberry pi 4 NAS Storage Family
Maybe you can understand our NAS family products more clearly Please refer to Raspberry pi 4 NAS Storage Family
-
Need of Cases and PSU
@Jeff Kay Hi, thanks for your good advise. I add the UPS board and 18650 battery holder on X829-C1, the cooling fan is assembled on the side of case. X829-C1 is only for X829
-
Stacking boards of different sizes
@William Shelnut You can use multi X835 board to stack them, we don't announce that X835 is stackable because we are customizing the USB 3 cable ^_^, in fact, X835 is stackable. BUT you need to DIY...
-
Stacking boards of different sizes
@William Shelnut Don't use X835 with X828, they use the different voltage, please refer to Power Requirement
-
Is X829 stackable?
Hi Alexia Thanks. 1. X835/X835 is only for 3.5 inch HDD, and X835/X835 require DC 12V, BUT x828/x829 is for 2.5 inch SSD/HDD, so don't use them together. 2. X829 and X828 cannot be mixed, x828 s...
-
Chaining HDD Hats
Hello, I have 4 HDD: 1x 3.5 2x 2.5 1x 2.5 USB (some weird none SATA connector sadly) Is it possible to stack them with these products: https://geekworm.com/collections/new-arriv...
-
Is X829 stackable?
Hi all, I plan to mount a 4GB Raspberry Pi 4b with two 2,5" HDD (1TB + 500GB) that I currently own. I intended to go for your full Raspberry Pi 4 Model B+2Pcs X828 2.5" SATA HDD/SSD Cluster Stora...
-
Stacking boards of different sizes
Thanks for the pic, right now i'm just waiting for the new X835 to arrive. My Pi4 system is stacked from bottomto top as follows X828 (1Ea) (and 1 Waiting for new SSD) then the PI 4 then the X735 p...
-
Just got my x750, shutdown issue
@Joseph Bodhorn realized after I added a second comment to my own post that probably burned the wrong backup to the disk I was using, uname - a is now "Linux retropie4 4.19.97-v7l+ #1294 SMP Thu J...
-
Just got my x750, shutdown issue
@Joseph Bodhorn with batteries in and the jumper set to auto on my pi 4 won't boot after a full shutdown, reboots still work fine. No matter how long I hold the power button down the led's on the x...