Hi, You can refer to the X876 for Raspberry Pi 4: https://geekworm.com/products/x876, you can find the case, power supply, SSD etc at Frequently Bought Together.

@retro bowl The NASPi version that is now available does not allow the capability of automatically turning on the device

That makes sense. Do you know of any workaround or adapters that might work for a 30-pin 4K LVDS connection? Would using an HDMI to eDP converter be a possible solution, or is there a specific boar...

Is there a metal case for the Pi 4 with the NVME hat like the one for the Pi5 available?  

@Cindy Ding thanks for your response, out of curiousity how tall are the  Pi 5 X1205 UPS shields?

@aowolabi Hi, the X1205-C1 or X1200-C1 can not accommodate the heat sink with the right stand offs. The heatsink is too thick, the board ports can't align with the cases if you use the heatsink. Th...

Hi Geekworm!!, I have a Raspberry Pi setup that has a Back-mounted PCIe 3.0 Switch to dual M.2 hat for Raspberry Pi 5 (Seeed Studio) with an SSD and a Hailo 8 Accelerator with Heat Sink attached t...

@Red Light Green Light Consider replacing the existing fan with a higher quality, quieter model. Look for fans specifically designed for low noise, such as those with fluid dynamic bearings (FDB) o...

@google baseball Look for an updated version of the script or a different tool that serves the same purpose. Many scripts become obsolete as technology advances, and often, there are newer options ...

@geometry dash meltdown Thank admin!

You can stack multiple X-UPS1s to increase the current

hi i am asking if i could use rpi5 16gb to make a nas with built in battery like x1009 with 5 sata ssd a raspberry 5 16g  with 1 or 3 x-ups1 the x-ups1(s) would be to run the nas atleast 30...

Very strange. Our half height bracket must be a standard part.

You can use the RPi5 power switch pad to bring out the switch yourself

@ Drift Boss You will need to change any legacy scripts or apps that utilize the sys/class/gpio interface to utilize libgpiod.   

@cragen Loch If I rewire, how would it be correct?  Edited by Stickman Hook 1 day ago

I have an ASUS RS7001-E11-RS4U 1U server with a half height PCIe slot in a "butterfly riser cage". The half height bracket on the X650 doesn't fit into the slot on the board. It's too tall or somet...

Greetings fellow Piers, Is it possible to add an On/Off switch to the Pi5 when it is installed in the metal case. Thanks Paul

@Sprunki Mod If you have legacy scripts or applications that use the sys/class/gpio interface, you will need to update them to use libgpiod. This may require significant changes to your code.

Hello, I am missing something. /boot/config.txt is set with dtparam=audio=on,pciex1. I tried the "nvme" param as well. dmesg | grep nvme founds nothing. lspci have a broadcom bridge and and Eth co...