Hello guys,
I have a raspberry pi 3b paired with an x820 board (with a 120gb SSD) which hosts my home assistant instance. Recently i bought the original usb zigbee dongle sold by home assistant, skyconnect. The problem comes when i connect the usb dongle and i try to boot. The raspberry pi green led and also the blue led from x820 board blinks once then nothing happens. What i realized, on booting/rpi restart, i need to disconnect the usb dongle for a few seconds from the rpi to let the rpi to recognize the x820 board/ssd. After that the setup works creat.
Is there a solution to fix this issue on boot?
Thanks!
