x735 software

• x735

• BE

  Brent Engle

  7/30/21, 12:42 AM

  trying to install x735 v2.5 software on RPI 4 - 64 gb and have run into a problem, see below. Not sure what to do as I cant get the cooling fan to work?

  pi@raspberrypi:~ $ sudo apt-get install pigpio python-pigpio python3-pigpio git clone https://github.com/geekworm-com/x735-v2.5

  
  Reading package lists... Done
  Building dependency tree
  Reading state information... Done
  E: Unable to locate package clone
  E: Unable to locate package https://github.com/geekworm-com
  E: Couldn't find any package by glob 'https://github.com/geekworm-com'
  E: Couldn't find any package by regex 'https://github.com/geekworm-com'

  If I run seperately I get:

  pi@raspberrypi:~ $ git clone http://github.com/geekworm/x735-v2.5

  -bash: git: command not found

  What should I be typing?

  0 likes 0 likes Liked Like

  ---

  8
  Posts

  455
  Views

  Reply

  ---

• BE

  Brent Engle

  7/30/21, 2:03 AM

  Needed to install git... 

   

  0 likes 0 likes Liked Like

  ---

• BE

  Brent Engle

  8/1/21, 10:58 PM

  Originally I purchased an x829 with the x735 hat. I did get it working but a couple of days later I received my X708-A1 battery holder and the x708 hat.

  I fully assembled the unit with the x829 on the bottom, the x708-A1 next  the RPI4 and topped off with x708 power management hat.

  I purchased from Amazon a USB 3.0 powered hub, a longer USB cable to connect the x829 into the RPI4. However I waiting for the longer 2.54mm Jumper cable, should get them today.

  The problem I'm having is I can not remove the x735 software.

  sudo ./uninstall.sh
  
  I get: sudo ./uninstall.sh: command not found?
  
  Also may system has been shutting down on it's own, even when in the middle of typing a command.

  Thanks

  Brent

  0 likes 0 likes Liked Like

  ---

• BE

  Brent Engle

  8/1/21, 11:18 PM

  Sorry for adding a second post, but due to the pandemic, it takes a long time, after it gets to the States, so ordered a lager coolong fan from Amazon, see attached photo:

   

  

  It is a DV:5v fan drawing 0.18 A. but when I plug it into any of the 5v it does not work.

  Also my RPI4 just rebooted on it's own as I was typing this.

  Any help would be appreciated.

  Brent

   

   

  0 likes 0 likes Liked Like

  ---

• LZ

  Lisa ZHANG Staff member

  8/2/21, 12:15 PM

  Hello，Brent

  could you please send some installation pictures by email?  and please tell us your order number.thanks.       support@geekworm.com

  Best regards

  0 likes 0 likes Liked Like

  ---

• RT

  Raelene Tyner

  7/26/22, 4:23 PM

  Did you find any info out ? 

  mapquest driving directions
  0 likes 0 likes Liked Like

  ---

• BK

  Bob Kinney

  7/13/23, 10:28 PM

  My x735 v2.5 software on RPI 4 - 64 gb run for angry gran is ok and there is no problem.

  0 likes 0 likes Liked Like

  ---

• JLL

  Jhon Lester Lester

  12/26/24, 6:31 PM
   

  Having trouble with the X735 software? Make sure you're using the latest version, and if you're encountering issues, try reinstalling or checking for any compatibility problems with your system. Sometimes running the software as an administrator can help too.

  For gaming enthusiasts, don't miss out on PS2Roms.org and NintendoRoms.com. Both sites offer a huge selection of PS2 and Nintendo ROMs for all your gaming needs!

  0 likes 0 likes Liked Like

  ---