X301 SATA NAS Storage Expansion Board - UASP issue | Geekworm

X301 SATA NAS Storage Expansion Board - UASP issue

t

tenox7
1/4/26, 4:54 AM
Hi,

I have https://geekworm.com/products/x301 attached to a RPI Zero 2W, with latest Raspbery PI OS. On the product page it says:
- Supports USB Attached SCSI Protocol (UASP)
however when I look at the system it shows as USB mass storage (BOT), not UASP:
```
root@raspberrypi:~# lsusb -t
/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 001: Dev 003, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 002: Dev 004, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 003: Dev 005, If 0, Class=Vendor Specific Class, Driver=asix, 480M
```
Where it says Driver=usb-storage it should have said Driver=uas

Any idea how to make it recognize as UASP instead of BOT?

Thanks!
0 likes 0 likes

1
Posts

17
Views

Please login to reply this topic!