X735 Power Button Script and Booting from USB

• SC

  Sterling Crapser

  7/1/20, 8:01 AM

  I have a question regarding setup of X735 power button script when combined with booting from USB.  I may already know the answer but want to ask first.

  I tried setting up computer to boot from USB (I have X872 shield component with NVMe SSD).  I used the steps on Tom's Hardware and this works fine.  But when I set up power button script for momentary switch in the case (I have X857-C1) it does not work completely.  Turning on and powering off works.  Rebooting using button or software fails.  I see a message on startup that the SD card cannot be found and the system enters a 20 second cycle to try booting again which also fails.  Only way to start computer is to completely power off and power on.

  I am wonder if I should set up power button on SD card first; then perform steps to boot from USB.  The script for power button was written before code that enables booting from USB.

  Please give me feedback.  I will try what I described in the meantime and update results.

  Thanks

  0 likes 0 likes Liked Like

  ---

  4
  Posts

  353
  Views

  Reply

  ---

• HH

  Harry Huang Staff member

  7/1/20, 6:30 PM

  @Sterling Crapser 

  Hi, try to see here: 500ms may be too short for usb port-power reset

  Or check your hardware connection?

  Thanks

   

   

   

  0 likes 0 likes Liked Like

  ---

• SC

  Sterling Crapser

  7/2/20, 2:59 AM

  @Harry Huang 

  Hello Harry,

  Thank you for the information.  It was exactly what I needed.  I made the changes and the reboot now works fine (started by button or software).

  I do have one further question:

  When I power off using the operating system's "Shutdown" option, the power to the case remains on.  I must shut down the power separately.  I'm assuming this is because the Raspian OS is not interacting with the X735 and would need a custom script or something.  Is this correct?

  It's not a big deal...I'm curious.

  Thanks so much for your help!

  0 likes 0 likes Liked Like

  ---

• HH

  Harry Huang Staff member

  7/5/20, 2:47 PM

  @Sterling Crapser 

  Your understand is right.

  Only press the button of X735 to supports safe shutdown.

   

  Regards.

  0 likes 0 likes Liked Like

  ---