•
1 11

Geekworm X1003 PCIe to M.2 Key-M NVMe SSD PIP TOP for Raspberry Pi 5

$12.00
$14.00
$12.00
-14%
Only 495 items in stock! Out of stock!
  • Description
  • Manual
  • M.2 HATs
  • Shipping Policy
  • Reviews

Note: The Raspberry Pi 5, SSD or power adapter is not included in the packing list.

Overview

The X1003 is a PCIe to NVME expansion board designed to support official Raspberry Pi 5 Active Cooler and the official Raspberry Pi 5 ABS case, it is very compact in size and only supports NVME ssd's of the 2230/2242 specification, in order to install the X1003 you will need to remove the fan layer on the top of the enclosure.

User Manual:  https://wiki.geekworm.com/X1003

[Important Notes]

  • Compatible with M.2 Key-M NVMe SSD
  • Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
  • Older NVMe drives with less efficient flash media may not perform as well as newer drives
  • New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.

Features

  • Compatible with official Raspberry Pi 5 Active Cooler /H501/H510 and Raspberry pi 5 official case ;
  • FFC cable has been updated to 30mm length
  • Supports installation of official active cooler/H501/H510 only, NOT support H505/H509/Argon THRML 30mm Active Cooler
  • With M.2 disk activity (“ACT”) LED; On: Power OK/Standby,Flashing: Reading/Writing
  • Supports 2230/2242 NVME M2 SSD only
  • Supports additional GPIO power supply in addition to FPC power supply

PS: The X1003 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS

Packing List

  • 1 x X1003 V1.3 NVMe SSD Shield
  • 1 x PCIe FFC cable(30mm length, yellow)
  • 1 x M2x13mm Screw (fix x1003 shield to official Active cooler)
  • 1 x M2x4mm Screw (to fix MVME M2 SSD)

    Refer to: https://wiki.geekworm.com/X1003

    Please email to us at info@geekworm.com if you have other questions.

    After the release of the Raspberry Pi AI Kit, we tested four PIPs: X1001, X1004, X1011, and M901. X1001, X1004, X1005 and M901 etc. all support the hailo-8 ai ​​accelerator, but X1011 does not.

    It should be noted that X1004 and X1005 uses ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch, and speed is still PCIe Gen 2.0 5Gbps speed. when you use an hailo-8 ai accelerator, Raspberry Pi Fundation highly recommends using PCIe 3.0 to achieve best performance with your AI Kit.

    Our tentative conclusions are as follows:

    • If you need to use hailo-8 ai accelerator with high performance, it is recommended to use X1015/X1002/X1003/M901/ the official M.2 HAT+ etc. When choosing these PIP boards, you should focus on whether there is a conflict between the camera cable and the PIP board installation, and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
    • If you don't care about the high performance brought by PCIe 3.0, then you can consider using X1004, so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.
    Model Features Mounting Position SSD Size Matching Case Matching Cooler Support Hailo-8 AI Accelerator
    X1000
    • PCIe to NVMe M.2 SSD shield
    • Supports M.2 2230/2242 SSD
    • Supports PCIe 2.0 & PCIe 3.0
    • Transfer speeds up to 5~8Gbps
    • Supports super-fast boot
    		 Top
    • 2230
    • 2242
    		 Not tested
    X1001
    • PCIe to NVMe M.2 SSD shield
    • Supports full-size M.2 2280 SSD
    • Supports PCIe 2.0 & PCIe 3.0
    • Transfer speeds up to 5~8Gbps
    • Supports super-fast boot
    		 Top
    • 2230
    • 2242
    • 2260
    • 2280
    		 Yes
    X1002
    • PCIe to NVMe M.2 SSD shield
    • Supports full-size M.2 2280 SSD
    • Attaches to the RPi5 bottom
    • Transfer speeds up to 5~8Gbps
    • Supports super-fast boot
    		 Bottom
    • 2230
    • 2242
    • 2260
    • 2280
    		 Not tested
    X1003
    • PCIe to NVMe M.2 SSD shield
    • Install inside Raspberry Pi case
    • Compatible with RPi active cooler
    • Supports M.2 2230/2242 SSD
    • Supports super-fast boot
    		 Top
    • 2230
    • 2242
    		 Not tested
    X1004
    • PCIe to NVMe dual M.2 SSD shield
    • Supports 2 full-size M.2 2280 SSD
    • Supports PCIe 2.0 up to 5Gbps
    • High-performance packet switch
    • Support HAT standby power state
    		 Top
    • 2280
    		 Yes
    X1015
    • PCIe to NVMe M.2 SSD shield
    • Same features as official M.2 HAT+
    • Same schematic & key component
    • Supports full-size M.2 2280 SSD
    • Supports up to 4TB NVMe SSD
    • Top
    • 2230
    • 2242
    • 2260
    • 2280
    		 Yes
    X1005
    • PCIe to NVMe dual M.2 SSD shield
    • Supports 2 full-size M.2 2280 SSD
    • Supports PCIe 2.0 up to 5Gbps
    • High-performance packet switch
    • Attaches to the RPi5 bottom
    		 Bottom
    • 2230
    • 2242
    • 2260
    • 2280
    		 Yes
    X1011
    • PCIe to NVMe 1-4 M.2 SSD shield
    • Supports 4 full-size M.2 2280 SSD
    • Supports PCIe 2.0 up to 5Gbps
    • Supports up to 4TB NVMe SSD
    • High-performance packet switch
    		 Bottom
    • 2230
    • 2242
    • 2260
    • 2280
    		 No Support
    M901
    • PCIe to NVMe M.2 SSD shield
    • Supports full-size M.2 2280 SSD
    • Supports PCIe 2.0 & PCIe 3.0
    • Transfer speeds up to 5~8Gbps
    • Supports super-fast boot
    		 Top
    • 2230
    • 2242
    • 2260
    • 2280
    		 Yes
    Q100
    • PCIe to NVMe M.2 SSD shield
    • with 1.3 inch TFT to display
    • Supports M.2 2242 SSD
    • Supports super-fast boot
    		 Top
    • 2242
    		 Not tested
    Q200
    • PCIe to NVMe dual M.2 SSD shield
    • Supports 2 full-size M.2 2280 SSD
    • Supports PCIe 2.0 up to 5Gbps
    • High-performance packet switch
    		 Top
    • 2280
    		 Not tested
    M300
    • PCIe to NVMe M.2 SSD shield
    • Supports full-size M.2 2280 SSD
    • Supports PCIe 2.0 & PCIe 3.0
    • Transfer speeds up to 5~8Gbps
    • Supports super-fast boot
    		 Top
    • 2230
    • 2242
    		 Not tested
    M400
    • PCIe to NVMe M.2 SSD shield
    • Supports full-size M.2 2280 SSD
    • Supports PCIe 2.0 & PCIe 3.0
    • Transfer speeds up to 5~8Gbps
    • Supports super-fast boot
    		 Top
    • 2230
    • 2242
    • 2280
    		 Not tested

    We send orders to worldwide with tracking number.

    For detail refer to Shipping Policy

    You may also like

    Recently viewed product