-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
-
Media gallery
Geekworm X1002 PCIe to M.2 2280 NVMe SSD Bottom for Raspberry Pi 5
- Regular price
- $16.00
- Regular price
-
- Sale price
- $16.00
- Unit price
- per
Couldn't load pickup availability
Have a question?
Notified by email when this product becomes available
- Description
- Manual
- PIPs
- Shipping Policy
- Reviews
Note: The Raspberry Pi 5 , M.2 NVME SSD, SD card is not included in the packing list.
Overview
The X1002 V1.0 shield is a NVMe M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIe interface of the Raspberry Pi 5 to utilise the NVME M2 SSD for fast data transfers and ultra-fast booting.
Now we use black FPC wire, which has electromagnetic shielding and anti-interference
User Manual: https://wiki.geekworm.com/X1002
[Important Notes]
- Compatible with M.2 NVMe SSDs
- Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
- Older NVMe drives with less efficient flash media may not perform as well as newer drives
- New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
Features
- Full compatible with other HAT shield;
- Customized FPC cable for easy use of TF card
- Supports installation of official active coolers for heat dissipation;
- With ''ACT'' LED Indicator;
- Supports 2230/2242/2260/2280 NVMe M2 Key-M SSD.
- Can power the X1002 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)
Packing List
- 1 x X1002 V1.0 NVMe SSD Bottom Shield
- 1 x PCIe FFC cable
- 4 x M2.5x5mm F/F Spacers
- 4 x M2.5x10mm Screws
- 1 x M2x4mm Screws (to fix MVME M2 SSD)
Refer to: https://wiki.geekworm.com/X1002
Please email to us at info@geekworm.com if you have other questions.
After the release of the Raspberry Pi AI Kit, we tested four PIPs: X1001, X1004, X1011, and M901. X1001, X1004, X1005 and M901 etc. all support the hailo-8 ai accelerator, but X1011 does not.
It should be noted that X1004 and X1005 uses ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch, and speed is still PCIe Gen 2.0 5Gbps speed. when you use an hailo-8 ai accelerator, Raspberry Pi Fundation highly recommends using PCIe 3.0 to achieve best performance with your AI Kit.
Our tentative conclusions are as follows:
- If you need to use hailo-8 ai accelerator with high performance, it is recommended to use X1015/X1002/X1003/M901/ the official M.2 HAT+ etc. When choosing these PIP boards, you should focus on whether there is a conflict between the camera cable and the PIP board installation, and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
- If you don't care about the high performance brought by PCIe 3.0, then you can consider using X1004, so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.
| Model | Features | Mounting Position | SSD Size | Matching Case | Matching Cooler | Support Hailo-8 AI Accelerator |
|---|---|---|---|---|---|---|
| X1000 |
|
Top |
|
Not tested | ||
| X1001 |
|
Top |
|
Yes | ||
| X1002 |
|
Bottom |
|
Not tested | ||
| X1003 |
|
Top |
|
Not tested | ||
| X1004 |
|
Top |
|
Yes | ||
| X1015 |
|
|
|
Yes | ||
| X1005 |
|
Bottom |
|
Yes | ||
| X1011 |
|
Bottom |
|
No Support | ||
| M901 |
|
Top |
|
Yes | ||
| Q100 |
|
Top |
|
Not tested | ||
| Q200 |
|
Top |
|
Not tested | ||
| M300 |
|
Top |
|
Not tested | ||
| M400 |
|
Top |
|
Not tested |
We send orders to worldwide with tracking number.
For detail refer to Shipping Policy