Which NAS Stoarge Board Shoud I Choose for my 3.5" SATA HDD?

by Cindy Ding on June 28, 2022

Sometimes we get the questions from the customers that they do not know how to choose the right nas storage expension bpard for the hard drive they have.

Today we'd like to introduce our nas storage expansion board for the 3.5" SATA HDD.

If you have a Raspberry Pi 3B+/3B or other previous versions than Raspberry Pi 3, then really sorry, we do not have a 3.5" SATA HDD expansion board to support Raspberry Pi 3 now.

In a long time ago in 2018, we have the X830 board to support Raspberry Pi 3 and one single 3.5" SATA HDD, but the X830 has been discontinued for a long time.

Now for Raspberry Pi 4 and one single 3.5" SATA HDD, we have the X832 V1.2/V1.0  12V 3.5 inch SATA HDD storage expansion board.

If you want to use Raspberry Pi 4& one single 3.5" SATA HDD, you can choose the X832 board Case PSU kit.

X832 V1.0 Kit: https://geekworm.com/products/x832-v1-0-board-case-kit

X832 V1.2 Kit: https://geekworm.com/products/x832-3-5-sata-storage-board-x735-board-dc-12v-5a-psu-metal-case-with-power-switch-fan-kit

User Manual: wiki.geekworm.com/X832

 If you want to use Raspberry Pi 4 & dual 3.5" SATA HDDs, you can choose the X880 board Case PSU kit.

X880 Kit1: https://geekworm.com/products/x880-x880-a1-a2-kit

X880 Kit2: https://geekworm.com/products/x880-x880-a3-kit

User Manual: wiki.geekworm.com/X880


Currently, we only have X832 and X880 board that can be used to support 3.5" SATA HDD. Hope you will like them!


Please note, comments must be approved before they are published