Posts made by Cindy Ding

• Will it fit??

  @aowolabi Hi, the distance/height from Pi 5 to the X1205-C1 case bottom is 31.1mm. Please refer to the below photo.

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  4/8/25, 10:26 AM
• Pi 4 with NVME Hat metal case

  Hi, You can refer to the X876 for Raspberry Pi 4: https://geekworm.com/products/x876, you can find the case, power supply, SSD etc at Frequently Bought Together.

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  3/26/25, 3:10 PM
• Will it fit??

  @aowolabi Hi, the X1205-C1 or X1200-C1 can not accommodate the heat sink with the right stand offs. The heatsink is too thick, the board ports can't align with the cases if you use the heatsink. Th...

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  3/25/25, 12:29 PM
• Any free shipping?

  Hi, Sorry, we don't provide free shipping, you can also consider to order from amazon if they are available on amazon, thanks!

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  1/21/25, 10:30 AM
• Cooling options for geekworm X630-A8

  Hi, You can refer to the last FAQ on the KVM-A8 WiKi: https://wiki.geekworm.com/KVM-A8#FAQ Q. Does KVM-A8 support passive heatsink such as (P165-A or P165-B etc) instead of fan? ...

  posted in General Discussion

  CD

  Cindy Ding
  12/3/24, 3:03 PM
• Geekworm X1001 is not working

  Hi,Please attach your order and email us, we can help you via email.1. Please provide the order number.2. Please provide the hardware connection photos, the SSD model you use.3. Make sure the FFC c...

  posted in General Discussion

  CD

  Cindy Ding
  11/4/24, 4:06 PM
• NASPI V2.0 fan script installation

  @Sébastien Lemarie Hi, really sorry, we do not test it, so can't help about your questions. We have tried to test the home assistant OS, but stucked in the process, thanks for your understan...

  posted in General Discussion

  CD

  Cindy Ding
  8/9/23, 7:08 PM
• Questions about X680 and ATX modules

  @Kevin Sporinsky Hi, we have replied your question via email, please check your email, thanks!

  posted in General Discussion

  CD

  Cindy Ding
  8/8/23, 10:55 AM
• WiFi/BT M.2 For Pi5 plus

  @Dimitris Christopoulos Hi, we suggest you can ask for help from the Orange Pi official, thanks!

  posted in General Discussion

  CD

  Cindy Ding
  7/12/23, 4:05 PM
• Gemini NASPi - RAID0/1 verify

  @Gianni D'Alonzo Hi,We haven't specifically tested OMV, but the OMV system itself supports software RAID. It can be set to PM mode and try the OMV software RAID. If you want to test (NASPi Gem...

  posted in General Discussion

  CD

  Cindy Ding
  7/12/23, 4:03 PM
• Is it possible to adapt a x630-A4 to work with a full Rpi4 board?

  @Rafael Reis Hi friend, really sorry the X630-A4 can't replace X630-A3, and we suggest you can just order the X630-A3 board to use the kit with Raspberry Pi 4. If you need the X630-A3, you can cont...

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  5/27/23, 3:50 PM
• Disk not found X876

  Hi @Peter Shewood  1. Please help provide the screenshot of run the lsusb and lsblk command via email.2. Can it work if it is connected to the USB2.0 port of the Raspberry Pi motherboard with...

  posted in General Discussion

  CD

  Cindy Ding
  5/4/23, 6:22 PM
• UPS Hats and Gemini NAS

  @Peter D  Hi sir,Really sorry there is no UPS hat can combine with the NASPi Gemini 2.5 kit to use together.best regards,Cindy

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  3/20/23, 11:34 AM
• Question about X728-A1 and combination with...

  @quarreller quarreller Hi sir,First, we think the N300 case is enough for passive cooling.We do not test if the X728-A1 is ok for the combination, it seems OK, but may need to use proper spacer st...

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  3/20/23, 11:32 AM
• X728 with the X715

  @Andrew Fitzpatrick Hi,Yes, the X728 can use with X715 together.But please do not stack them via GPIO, in case any wrong operation to damage the boards. You can use the XH2.54 2pin cable to connec...

  posted in General Discussion

  CD

  Cindy Ding
  3/17/23, 6:10 PM
• X857-C3

  @Jean-Paul Delamarre Hi sir, sorry about the inconvenience. we have got your email and we will help you solve the issue by email, thanks! best regards, Cindy/Geekworm

  posted in General Discussion

  CD

  Cindy Ding
  1/10/22, 11:59 AM
• Confusion: PSW19 has no NC Leg

  Hi friend, The power switch has been updated to a new verion, please refer to the photo :  https://wiki.geekworm.com/PSW19#/media/File:PSW19-UPDATE.jpg

  posted in General Discussion

  CD

  Cindy Ding
  11/6/21, 3:01 PM
• Third Generation HDMI to LVDS board. What has changed?

  Hi friend, The new version of LVDS V1.5 has replaced the main chip, and the functions and interface definitions have not changed, but according to the manufacturer's test, the compatibility will b...

  posted in General Discussion

  CD

  Cindy Ding
  5/14/21, 5:04 PM
• Please redo your store

  @James Boelter Hello sir, do you refer to our categories? It is clear there.

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  3/31/21, 12:32 PM
• Raspberry Pi 3B+

  Hi friend, Thanks for your email. Really sorry that the X820 V3.0 case does not support X708 UPS board. You can use the X820 board +X708 UPS without the X820 V3.0 case for Raspberry Pi 3B+. The...

  posted in Pre-Sales Questions

  CD

  Cindy Ding
  3/1/21, 10:44 AM