Hi!
I want to order a PiKVM-A3 kit to manage my Intel NUC NUC11PAHI7. Anybody has tried and knows a success story for Intel NUC? I can't seem to find the ATX pins on the NUC motherboard..., never had one before and I'm used to "normal" motherboards.
Thanks for your help!
Is the forum alive?
@Virginia Gonzales
We didn't really test it against an NUC, and we doubt you'd be able to install the X630-A5 into a NUC case, although the X630-A5 also comes with a half-size mounting bracket.
@Virginia Gonzales
The dimensions of the reference X630-A5 are as follows:
There's no way to install with brackets, I can install the board alone, what I wasn't sure is the ATX pins but I found them, they are 2mm so I have to get a 2mm female cable/s. I will try anyway.
About the X630-A5, should I buy it separately or is included in the kit? I will buy "Geekworm KVM-A3 Kit KVM sobre IP para Raspberry Pi 4" from https://amzn.eu/d/0ZXOXX1
@Virginia Gonzales KVM-A3 includes the X630-A5
Perfect! I will give it a try and get back, in the "worst" scenario I will use it on my Desktop so is a win win.
@Virginia Gonzales Thanks.
