Important Note: The current N100 case, T300 case and T100 case Only fit with Jetson Nano Development Board Rev A but NOT Rev B01.
We totally design 3 cases for Jetson Nano：N100 Case, T100-C1 Case,T300-C2 Case.
N100 Case(for Jetson Nano Only),
T100-C1 Case(for Jetson Nano and T100 NVMe M.2 SSD Shield),
T300-C2 case(for Jetson Nano and T300 2.5 inch SATA SSD/HDD Shield).
Please choose the right case you need!
This is a metal case specially designed for NVIDIA Jetson Nano Developer Kit and NVMe M.2 SSD Shield Storage Expansion Board T100 V1.1, and it supports power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, and easily assemble it.
we recommend that you read the introduction to the power supply in the official documentation before you assemble this case, thus you can understand deeply this case.
Please refer to : https://developer.nvidia.com/embedded/learn/get-started-jetson-nano-devkit for NVIDIA Jetson Nano.
- Equipped with power control switch and reset switch, and it is convenient to start with one button.
- The power switch has LED indicator.
- The reset switch is placed on the back to prevent accidental touch.
- Support to install a cooling fan, reserve 22mm high fan installation height, easy to install the official recommend fan.
- two antenna hole is reserved to facilitate the arrangement of the external antenna. (as the antenna in the photo is not included if you need to use you have to buy it yourself)
- Support to install ribbon GPIO cable and camera
Q1:How to assemble this NVIDIA Jetson Nano T100 case?
A: Please refer to the picture on our wiki: raspberrypiwiki.com/index.php/T100
Q2: Is it supported to install a cooling fan?
A: Yes, it is support for fan installation, 22mm high fan installation height is reserved. It is support to install Noctua NF-A4x20 5V PWM fan. (We test this fan it is ok to use and a good choice.)
Q3: How do I use the jumper cap?
A: Because this case has a power switch, you need to disable the AUTO ON function first. Please insert the jumper cap into the AUTO ON position of the J40 pin to disable the AUTO ON function.(On the back of your board there is words " AUTO ON DIS")
The NVIDIA Jetson Nano Developer Kit and antenna are not included, and the 4-pin cooling fan is not included aslo!
- 1 x Metal Case for NVIDIA Jetson Nano Board and T100
- 1 x Power Switch(Momentary switch, power on the board)
- 1 x Reset Switch (Momentary switch, reset the board)
- 2 x Jumper (Disabled the AUTO ON, and toggle the power supply between Micro USB and DC Jack)
- 1 x Screws Pack
- 1 x ABS Tweezers (It is useful when you install a fan only)
- All orders will be shipped within 48 hours on receipt of cleared payment on Woking Days. (From Moday to Friday in 24-48 hours as usual, Except for Chinese legal holidays or big holidays or Weekend)
- If you need faster shipment, please choose DHL or EMS or FedEx IP etc(Shipping fare paid by yourself). Or we will deliver via the default method of standard shipping.(Usually by China Post Registered Air Mail with tracking number if the order ammount is more than $9.99); Please contact us to calculate the shipping cost by faster shipping way like DHL, EMS or FedEx...
- Please make sure that your shipping address is 100% correct with full name and a right phone number included, the phone number is very important in the shipping address.
- We ship items to worldwide with delivery time guarantee. Please understand the unexpected delay during the international shipping.
- We usually declare a lower value for all orders to avoid the cutoms tax for our customers, but the buyer still need to do customs clearance themselves if it's a requirement by the destination country.
- If you didn't receive your product or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.
- We provide resend or refund or store coupons for the item you received was substantially different from the item represented on the product detail page.
- For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!
- It is better to reject the package if you find it obviously broken and ask for compensation from your local post office.
- We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.
- If buyer's reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.
- We will refund to buyer after we receive the return packages in its original condition package with no items missing. Or buyers could choose to have a replacement.
- We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.
Geekworm products on the website all support a wholesale price if you need large quantities. You can send us your enquiry by email: firstname.lastname@example.org about the item you need, item quantities, destination country of shipment. Then we will send you our lowest price according to item quantities, and the shipping cost also will be calculated according to the quantities you need.
Support dropshipping orders from all over the world.Please leave a note if you make a dropshipping order. We will not put anything related with our website into the parcel, please don't worry.