Geekworm T300-C3 Metal Case for Jetson Nano and T300 Shield

Note: the T300-C3 metal case has been sold out, no plan to produce again. Please email us if you need to order in bulk.

Update History

This is the latest T300-C3 metal case for use with T300 V1.1and Jetson Nano 2GB/4GB/A02/B01 in September 2021.

In March 24th 2020, the T300 case has been updated to new version, the new version support both Jetson nano A02 and B01 version.

User Manual: https://wiki.geekworm.com/T300-C3

Click to Order from Amazon

[Read Me]
We totally design 3 cases for Jetson Nano：N100 Case, T100-C1 Case,T300-C2 Case.
N100 Case(for Jetson Nano Only),
T300-C3 case(for Jetson Nano and T300 2.5 inch SATA SSD/HDD Shield).
Please choose the right case you need!

Overview
This is a metal case T300-C3 specially designed for NVIDIA Jetson Nano Developer Kit(REV A02&B01) and T300 2.5 inch SATA SSD/HDD Shield, and it supports power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, really easily assemble it.

Key Features

• Equipped with power control switch and reset switch, and it is convenient to start with one button.
• The power switch has LED indicator.
• The reset switch is placed on the back to prevent accidental touch.
• Support to install a cooling fan, reserve 22mm high fan installation height, easy to install the official recommend fan.
• two antenna hole and one camera hole is reserved to facilitate the arrangement of the external antenna and camera. (as the antenna in the photo is not included if you need to use you have to buy it yourself)
• Support to install ribbon GPIO cable and camera

[FAQ]
Q1:How to assemble this NVIDIA Jetson Nano case?
A: Please refer to the picture on WIKI:https://wiki.geekworm.com/T300

Q2: Is it supported to install a cooling fan?
A: Yes, it is support for fan installation, 22mm high fan installation height is reserved. It is support to install Noctua NF-A4x20 5V PWM fan. (We test this fan it is ok to use and a good choice.)

Q3: How do I use the jumper cap?
A: Because this case has a power switch, you need to disable the AUTO ON function first. Please insert the jumper cap into the AUTO ON position of the J40 pin to disable the AUTO ON function.(On the back of your board there is words " AUTO ON DIS")

Packing List

• 1 x Metal Case for NVIDIA Jetson Nano Board and T300
• 1 x Power Switch(Momentary switch, power on the board)
• 1 x Reset Switch (Momentary switch, reset the board)
• 2 x Jumper (Disabled the AUTO ON, and toggle the power supply between Micro USB and DC Jack)
• 1 x Screws Pack
• 1 x ABS Tweezers (It is useful when you install a fan only)

Note:
The NVIDIA Jetson Nano Developer Kit, T300 2.5 inch SATA SSD/HDD Shield and antenna are not included, and the 4-pin cooling fan is not included aslo!