@Harry Huang Hello Harry, Thank you for the information. It was exactly what I needed. I made the changes and the reboot now works fine (started by button or software). I do ha...
Sterling Crapser
Posts made by Sterling Crapser
-
X735 Power Button Script and Booting from USB
-
X735 Power Button Script and Booting from USB
I have a question regarding setup of X735 power button script when combined with booting from USB. I may already know the answer but want to ask first. I tried setting up computer to boot fr...
-
X872/X735/X857-C1/RPi4 Question
@Harry Huang My fan has been replaced and all is well. Thank you for your assistance!
-
X872/X735/X857-C1/RPi4 Question
@Harry Huang I have removed and photographed the fan (see pictures below). It is a 12V fan. I did try manually turning a fan leaf as you described and it does begin spinning but ...
-
X872/X735/X857-C1/RPi4 Question
@Harry Huang I'm adding this reply to my reply above. I just discovered the case fan does work...but only after I give it a push with my finger. I tried shutting off the power and turning i...
-
X872/X735/X857-C1/RPi4 Question
@Harry Huang From previous post by you, I answer your questions below: 1. ==Please show some pictures to confirm it. Sorry for the large picture. You can see I have the case fan att...
-
Attach X872 to RPi4 via (X872) USB 3.0 to (RPi4) USB 2.0? Keyboard/Mouse Dongle
I'm editting this post to say I have solved the problem of USB 3.0 port interfering with wireless keyboard and mouse. This was done by using a 6 inch USB 2.0 extension cable to attach t...
-
X872/X735/X857-C1/RPi4 Question
@Harry Huang Hello, I have assembled my computer and have several questions. 1. I did not attach the X872 USB bridge until after I installed the Raspberry Pi O/S. I tried to power th...
-
X872/X735/X857-C1/RPi4 Question
Question is answered by the post (Raspberry pi 4 NAS Storage Family). Thanks! Wish I had seen it sooner.
-
X872/X735/X857-C1/RPi4 Question
Hello, I have a question on how to attach power for the X857-C1 case fan that mounts to the right side (viewed from the back) of the case. I have attached the power for the X872 to the 5V (o...