Confusion: PSW19 has no NC Leg

• SD

  Sebastian Dörffner

  11/5/21, 9:47 PM

  Hello,

  i ordered a PSW19 Power switch, and i want to change the mode to only power on when pressed.

   

  But my PSW19 has only 4 Legs and missing the NC leg like in the wiki images.

  Is this wrong, or is there another way to achive NC mode?

  

   

  0 likes 0 likes Liked Like

  ---

  5
  Posts

  102
  Views

  Reply

  ---

• CD

  Cindy Ding Staff member

  11/6/21, 3:01 PM

  Hi friend,

  The power switch has been updated to a new verion, please refer to the photo : 

  https://wiki.geekworm.com/PSW19#/media/File:PSW19-UPDATE.jpg

  

  

  0 likes 0 likes Liked Like

  ---

• SD

  Sebastian Dörffner

  11/6/21, 10:14 PM

  @Cindy Ding 

  I dont think so. This photo shows a Reset-Switch (was included in my delivery). The Reset-Switch has no on/off feature, it just interrupts the power if pressed...before and after pressing it is always on. :(

  0 likes 0 likes Liked Like

  ---

• LZ

  Lisa ZHANG Staff member

  11/8/21, 2:30 PM

  Hi，Please refer to this picture； 

  LED does not light up when the power is on, and the LED lights up when the button is pressed, The device is powered on.

   

  

   

   

   

   

   

   

  0 likes 0 likes Liked Like

  ---

• JLL

  Jhon Lester Lester

  12/26/24, 6:47 PM
   

  It seems there’s some confusion regarding the PSW19 switch, as it doesn’t have a Normally Closed (NC) leg. This is because the PSW19 is typically a single-pole, single-throw (SPST) switch, meaning it only has a Normally Open (NO) leg and is designed to complete the circuit when pressed.

  For those interested in gaming, don't forget to visit NintendoRoms.com and PS2Roms.org for a great collection of Nintendo and PS2 ROMs!

  0 likes 0 likes Liked Like

  ---