Raspberry Pi (48)

Note: The Raspberry Pi 5, M.2 NVME SSD, SD card is not included in the packing list.OverviewThe X1002 V1.0 shield is a NVMe M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5...

According to the feedback, the issue of X1003 can't recognize or boot from SSD may lead by the FFC cable issue, we add one backup FFC cable in the X1003...

OverviewThis is a raspberry pi HDMI to CSI-2 Module with Toshiba TC358743XBG chip, HDMI input supports up to 1080p25fps. KVM OS supported. Click to Order from Amazon Amazon US Amazon JP...

Note: The X630 shield is required for the KVM-A3 kit, and the KVM-A3 (Without X630) is only available to those customers who have previously purchased theX630 shield. Geekworm Raspberry Pi-based KVM-Over-IP...

OverviewThis is new updated X862 V2.0 version from X862 V1.0. We solve the EMC interference issue between Raspberry Pi 4 and USB3.0 device.The X862 V2.0 M.2 NGFF SATA SSD Shield...

Note: The Raspberry Pi 4 is not included in the packing list. The X630 shield is required for the KVM-A8 kit, and the KVM-A8 (Without X630) is only available to...

UPDATE Notification: 1. The X857 has been updated to X857 V2.0 from X857 V1.2 version in Febuary 2021. Some changes: We removed the DC JACK power socket of X857 V1.2,...

Overview: This kit mainly provides matching installation copper spacer and screw packages for various Raspberry Pi 5 PCIe to M.2 NVME shield;This copper spacer includes four lengths of copper pillars...

Note: DIDO module in stock now! User Manual: https://wiki.geekworm.com/Raspberry_Pi_DIDO_Board The DIDO is upgraded to Version 1.3, and it's support the Raspberry Pi 4 Model B now. We have only reduced the...

Update: update from X630 V1.3 to X630 V1.5 version in December 2022, just remove the DIP switch on the back of X630. The X630-C1 is out of stock!!! OverviewThe X630...

Note: The Raspberry Pi 5, 18650 batteries, active cooler or power adapter is not included in the packing list.OverviewThis X1202 is an ultra-compact advanced uninterruptible power supply expansion board designed...

Note： 1. Make sure that the CM4 module is installed on the expansion board correctly before power on. 2. Please pay attention to the CM4 install directions. 3. The Raspberry...