Industrial ESP32 DIN - Best I/O Integration? | Geekworm's Forum

Industrial ESP32 DIN - Best I/O Integration?


  • I like the Industrial DIN rail ESP32-S3 solution.  I need to add 4 NTC temperature sensors and 3 relays , at least, to the I/O.  Am trying to figure out the best way to do this.   SPI link (preferred) or RS485 modules. ?  All this is going into a NEMA wall mount box favoring DIN Rail mounting.  I'm having a hard time visualizing how the the ESP32 I/O connector would mechanically connect to the SPI modules.  The latter who makes them ?



  • For that setup, I’d probably go with RS485 I/O modules if the sensors and relays are going to be spread around the DIN rail enclosure. It’s much easier to wire, more robust over longer distances, and you can find industrial modules with isolated inputs and relay outputs. SPI could work if everything is mounted close together, but the wiring and mechanical connections may get awkward. For the four NTC sensors, make sure the input module supports the correct thermistor type and resistance range. I’d also check whether the ESP32-S3 board has a suitable expansion connector or whether you’ll need a small custom interface PCB between the controller and the modules.


Please login to reply to this topic!