New Arrivals (29)

Note: The X1008 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Don't power the X1008 via DC powe jack and...

Notes: The X1007 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Older SATA drives with less efficient flash media may...

Note: The X1006 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Not compatible with M.2 NVMe SSDs, M.2 PCIe AHCI SSDs,...

Note: This is just a four NVMe SSD NAS solution. DOES NOT support NVMe boot with the existing firmware, DON'T buy if you want boot Raspberry Pi 5 from NVMe...

Note: The Raspberry Pi 5, Active Cooler or Power Adapter is not included in the packing list. User Manual: https://wiki.geekworm.com/X1010 OverviewThe X1010 PCIe FFC connector to standard PCIe x4 slot expansion...

Overview The Q100 is an expansion board similar to X1000. It has the function of PCIE to NVME ssd and also has an attached a 1.3" 240x240 Color TFT(ST7789 chipset),...

Overview: This kit mainly provides matching installation copper spacer and screw packages for various Raspberry Pi 5 PCIe to M.2 NVME shield;This copper spacer includes four lengths of copper pillars...

Note: the 15pin FFC cable is not support Raspberry Pi camera. Overview: This is a FFC cable kit for the Raspberry Pi 5 pcie interface. It includes 3 lengths, 30mm,...

This is just a dual NVME SSD NAS solution. DOES NOT support NVMe boot with the existing firmware, DON'T buy if you want boot Pi 5 from NVME ssd now. Overview The...

Overview: Since the X1002 is a bottom mounted NVME shield, we had to build a special enclosure P580 for it, The P580 case is compatible with raspberry pi 5 and the...

Note: The Raspberry Pi 5, SSD or power adapter is not included in the packing list.OverviewThe M400 V1.1 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry...

Note: The Raspberry Pi 5, SSD or power adapter is not included in the packing list.OverviewThe M300 V1.1 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry...